System information

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
182
Parameter Description
Port
Use the drop-down menu to choose the port that will display statistics.
Time Interval
ting between 1s and 60s, where "s" stands for seconds. The default Select the desired set
value is one second.
Record Number
t number of times the Switch will be polled between 20 and 200. The default value is Selec
200.
64
s) received that were 64 octets in length The total number of packets (including bad packet
(excluding framing bits but including FCS octets).
65-127
en 65 and The total number of packets (including bad packets) received that were betwe
127 octets in length inclusive (excluding framing bits but including FCS octets).
128-255
en 128 and The total number of packets (including bad packets) received that were betwe
255 octets in length inclusive (excluding framing bits but including FCS octets).
256-511
en 256 and The total number of packets (including bad packets) received that were betwe
511 octets in length inclusive (excluding framing bits but including FCS octets).
512-1023
512 and The total number of packets (including bad packets) received that were between
1023 octets in length inclusive (excluding framing bits but including FCS octets).
1024-1518
1024 and The total number of packets (including bad packets) received that were between
1518 octets in length inclusive (excluding framing bits but including FCS octets).
Show/Hide
not to display 64, 65-127, 128-255, 256-511, 512-1023, and 1024-1518 Check whether or
packets received.
Clear
Clicking this button clears all statistics counters on this window.
View Table Clicking this button instructs the Switch to display a table rather than a line graph.
View Graphic Clicking this button instructs the Switch to display a line graph rather than a table.