System information

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
9
The following parameters may be configured or viewed:
Parameter Description
Interface Name
The name of the IPv6 interface being modified.
VLAN Name
Enter the VLAN name of the IPv6 interface.
IPv6 Address
Enter the IPv6 address of the interface to be modified.
Admin. State
Toggle the state between Enabled and Disabled.
NS Retransmit
Time (0-
4294967295)
Enter a value between 0 and 4294967295. This is the neighbor solicitation’s retransmit timer in
milliseconds. The default is zero.
Automatic Link
Local Address
Toggle between Enabled and Disabled. Enabling this is helpful when no external source of network
addressing information is available.
Default
Gateway
Enter the IPv6 address of the default gateway.
Active
This read-only field indicates the status of this entry.
IPv6 Route Table
The user can configure the Switch’s IPv6 Route Table.
To view the following window, click Configuration > IPv6 Route Table:
Figure 2- 7. IPv6 Route Table window
Enter an IPv6 address in the Gateway field and click the Create button.