System information

xStack

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

Management Admin User

Configuration Yes Read-only

Network Monitoring Yes Read-only

Community Strings and Trap Stations Yes Read-only

Update Firmware and Configuration Files Yes No

System Utilities Yes No

Factory Reset Yes No

User Account Management

Add/Update/Delete User Accounts Yes No

View User Accounts Yes No

Table 2- 1. Admin and User Privileges

System Log Configuration

The System Log Configuration folder contains two windows: System Log Settings and System Log Host.

System Log Settings

The Switch allow users to choose a method for which to save the switch log to the flash memory of the Switch.

To view the following window, click Configuration > System Log Configuration > System Log Settings:

Figure 2- 15. System Log Settings window

Use the pull-down menu to choose the method for saving the switch log to the flash memory. The user has three options:

• Time Interval – Users who choose this method can configure a time interval by which the Switch will save the log files,

in the box adjacent to this configuration field. The user may set a time between 1 and 65535 minutes.

• On Demand – Users who choose this method will only save log files when they manually tell the Switch to do so, either

using the Save Log link in the Save folder or clicking the Save Log Now button on this window.

• Log Trigger – Users who choose this method will have log files saved to the Switch every time a log event occurs on the

Switch.

The default setting is On Demand. Click Apply to save changes made. Click Save Log Now to immediately save log files

currently on the switch.