System information

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
30
TimeZone Settings
Users can configure time zones and Daylight Savings Time settings for SNTP.
To view the following window, click Configuration > SNTP Settings > TimeZone Settings:
Figure 2 - 34. TimeZone Settings window
The following parameters can be set:
Parameter Description
Daylight Saving Time State
Use this pull-down menu to enable or disable the DST Settings.
Daylight Saving Time Offset In Minutes
Use this pull-down menu to specify the amount of time that will
constitute your local DST offset – 30, 60, 90, or 120 minutes.
Time Zone Offset From GMT In +/- HH:MM
Use these pull-down menus to specify your local time zone’s offset
from Greenwich Mean Time (GMT.)
DST Repeating Settings – Using repeating mode will enable DST seasonal time adjustment. Repeating mode
requires that the DST beginning and ending date be specified using a formula. For example, specify to begin DST on
Saturday during the second week of April and end DST on Sunday during the last week of October.
From: Which Week Of The Month
Enter the week of the month that DST will start.
From: Day Of Week
Enter the day of the week that DST will start on.
From: Month
Enter the month DST will start on.
From: Time In HH:MM
Enter the time of day that DST will start on.
To: Which Week Of The Month
Enter the week of the month the DST will end.
To: Day Of Week
Enter the day of the week that DST will end.