System information

xStack

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

The VLAN List tab lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an existing 802.1Q VLAN,

click the corresponding Delete button.

To create a new 802.1Q VLAN or modify an existing 802.1Q VLAN, click the Add/Edit VLAN tab. A new tab will appear, as

shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table on the next

page for a description of the parameters in the new window.

Figure 3 - 7. Add/Edit VLAN tab of the 802.1Q VLAN window

The following fields can then be set in the Add/Edit VLAN tab:

Parameter Description

VID (VLAN ID)

Allows the entry of a VLAN ID or displays the VLAN ID of an existing VLAN in the Add/Edit

VLAN tab. VLANs can be identified by either the VID or the VLAN name.

VLAN Name

Allows the entry of a name for the new VLAN or for editing the VLAN name in the Add/Edit

VLAN tab.

Enabling this function will allow the Switch to send out GVRP packets to outside sources,

notifying that they may join the existing VLAN.

Port

Shows all ports of the Switch for the

onfiguration option.

Tagged

Specifies the port as 802.1Q tagging. Clicking the radio button will designate the port as tagged.

Untagged

Specifies the port as 802.1Q untagged. Clicking the radio button will designate the port as

untagged.

Forbidden

Click the radio button to specify the port as not being a member of the VLAN and that the port is

forbidden from becoming a member of the VLAN dynamically.

Not Member

Click the radio button to allow an individual port to be specified as a non-VLAN member.

Click Apply to implement changes made.

To search for a VLAN, click the

Find

VLAN

tab. A new tab will appear, as shown below. Enter the VLAN ID number in the

field offered and then click the

Find

button. You will be redirected to the

VLAN List

tab. See the table on the next page for a

description of the parameters in the new window.