User`s manual

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
Figure 4- 21. 802.1Q Static VLANs menu
To configure the newly created VLAN, select the Switch being configured from the Unit drop-down menu
and provide a unique VLAN identifier and name. Configure the port settings for VLAN membership by
selecting the appropriate options for each port. Click the Apply button to configure the VLAN port
membership settings. A success or fail message appears to confirm whether the settings have been applied.
To view the VLANs that have been thus far configured, click the Show All Static VLAN Entries
hyperlink
(see example below). To add another new VLAN entry, click the Add button again in the first 802.1Q
Static VLANs window.
See the table below for a description of the port VLAN membership settings.
The following fields can then be set in either the Add or Modify 802.1Q Static VLANs windows:
Parameter Description
Unit
Choose the Switch that the VLAN will be created on.
VID (VLAN ID) For a new VLAN entry, type in a unique identifier. This number is used to
configure other settings such as GVRP status for ports in the VLAN.
VLAN Name
For a new VLAN entry type in a unique name. This name can be used to
identify the VLAN for IP interface assignment. Remember that VLAN
names are case-sensitive when referring to them for other applications
(such as setting up IP interfaces).
Port
Configure each individual port to be specified as member or nonmember
of the VLAN.
Tag
Specifies the port as either 802.1Q tagging or 802.1Q untagged.
Checking the box will designate the port as Tagged.
None
Specifies the port as not being a static member of the VLAN, but with no
t i ti f j i i th VLAN d i ll th h GVRP
72