User`s manual

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch

restrictions for joining the VLAN dynamically through GVRP.

Egress

Select this to specify the port as a static member of the VLAN. Egress

member ports are ports that will be transmitting traffic for the VLAN.

These ports can be either tagged or untagged.

Forbidden

Select this to specify the port as not being a member of the VLAN and

that the port is forbidden from becoming a member of the VLAN

dynamically.

The illustration below displays the port settings for a new VLAN (engineering) with a VID of 11.

Figure 4- 22. Add New Static VLAN Example menu

Click the Show All Static VLAN

Entries link to return to the first 802.1Q Static VLANs window, the new

VLAN entry appears listed in the current entries table.

Figure 4- 23. 802.1Q Static VLANs With Added VLAN menu

To change the port settings of any listed VLAN, click the Modify button.

Now click the Modify button in the first 802.1Q Static VLANs window for the newly created VLAN

(engineering). A new window appears, use this to configure the port settings to the existing VLAN, exactly