Specifications

DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DGS-3224TGR:4#
show radius
Purpose
Used to display the current RADIUS configurations on the switch.
Syntax show radius
Description
The show radius command is used to display the current RADIUS configurations on the
switch.
Parameters
None.
Restrictions
None.
Example Usage:
To display RADIUS settings on the switch:
DGS-3224TGR:4#show radius
Command: show radius
Index IP Address Auth-Port Acct-Port Status Key
Number Number
----- ------------------ --------- --------- ----------- ------------
1 10.1.1.1 1812 1813 Active switch
2 20.1.1.1 1800 1813 Active dgs324
3 30.1.1.1 1812 1813 Active dlink
Total Entries : 3
DGS-3224TGR:4#
show 802.1x user
Purpose
Used to display the current configuration of the 802.1x server on the switch.
Syntax show 802.1x user
Description
The show 802.1x user command is used to display the current configuration of the
802.1x Port-based Network Access Control server application on the switch.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example Usage:
To show the 802.1x user:
108