Specifications

DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#disable gvrp
Command: disable gvrp
Success.
DGS-3224TGR:4#
show vlan
Purpose
Used to display the current VLAN configuration on the switch
Syntax show vlan {<vlan_name 32>}
Description
This command displays summary information about each VLAN including the VLAN ID, VLAN
name, the Tagging/Untagging status, and the Member/Non-member/Forbidden status of each
port that is a member of the VLAN.
Parameters
<vlan_name 32> − The VLAN name of the VLAN for which you want to display a summary of
settings.
Restrictions
None.
Example Usage:
To display VLAN settings:
DGS-3224TGR:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN TYPE : static Advertisement : Enabled
Member ports : 1-24
Static ports : 1-24
Untagged ports : 1-23
Forbidden ports :
Total Entries : 1
DGS-3224TGR:4#
show gvrp
Purpose
Used to display the GVRP status for a port list on the switch.
Syntax show gvrp {<portlist>}
Description
This command displays the PVID/GVRP state/ingress checking state of each port on the
switch.
Parameters
<portlist> − Specifies a range of ports for which the GVRP status is to be displayed. The port
list is specified by listing the beginning port number and the highest port number of the
range. The beginning and end of the port list range are separated by a dash. For example, 3
would specify port 3. 4 specifies port 4. 3-4 specifies all of the ports port 3 and port 4 − in
numerical order.
Restrictions
None.
Example Usage:
79