Specifications

DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
17
LINK AGGREGATION COMMANDS
The link aggregation commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create
link_aggregation
group_id <value 1-32>{type [lacp|static]}
delete
link_aggregation
group_id <value 1-32>
config
link_aggregation
group_id <value 1-32>
{master_port <port>|
ports <portlist>
state [enable|disable]}
config
link_aggregation
algorithm
[mac_source|
mac_destination|
mac_source_dest
ip_source
ip_destination
ip_source_dest
show link_aggregation group_id <value 1-32>
algorithm
config lacp_ports <portlst> mode [active|passive]
show lacp_ports {<portlist>}
Each command is listed, in detail, in the following sections.
82