Specifications

DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#config ipif System ipaddress 10.48.74.122/8
Command: config ipif System ipaddress 10.48.74.122/8
Success.
DGS-3224TGR:4#
show ipif
Purpose
Used to display the configuration of an IP interface on the switch.
Syntax show ipif {<ipif_name 12>}
Description
This command will display the configuration of an IP interface on the switch.
Parameters
<ipif_name> − The name of the IP interface you want to show.
Restrictions
None.
Example Usage:
To display IP interface settings:
DGS-3224TGR:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
IP Address : 10.48.74.122 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Enabled
Link Status : Link UP
Member Ports : 1-24
Total Entries : 1
DGS-3224TGR:4#
89