Specifications

DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
19
IGMP SNOOPING COMMANDS
The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config igmp_snooping <vlan_name 32>
all
host_timeout <sec 1-16711450>
router_timeout <sec 1-16711450>
leave_timer <sec 1-16711450>
state [enable|disable]
fast_leave [enable|disable]
config igmp_snooping
querier
<vlan_name 32>
all
query_interval <sec 1-65535>
max_response_time <sec 1-25>
robustness_variable <value 1-255>
last_member_query_interval <sec 1-65535>
state [enable|disable]
config router_ports <vlan_name 32> [add|delete]
<portlist>
enable igmp snooping forward_mcrouter_only
show igmp_ snooping vlan <vlan_name 32>
show router ports vlan <vlan_name 32>
static
dynamic
show igmp_snooping
group
{vlan <vlan_name 32>}
config router_ports <vlan_name 32> [add|delete] <portlist>
disable igmp_snooping
90
Each command is listed, in detail, in the following sections.