User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide

729

Restrictions

Only Administrator-level users can issue this command.

Example

To add a member:

DGS-3420-28SC:admin#config sim_group add 2

Command: config sim_group add 2

Please wait for ACK !!!

SIM Config Success !!!

Success.

DGS-3420-28SC:admin#

To delete a member:

DGS-3420-28SC:admin#config sim_group delete 1

Command: config sim_group delete 1

Please wait for ACK !!!

SIM Config Success !!!

Success.

DGS-3420-28SC:admin#

76-6 config sim

Description

This command is used to configure the role state and parameters of discovery protocol on the

switch.

Format

config sim [[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-

90> | hold_time <sec 100-255>]

Parameters

commander - Transfer the role to commander.

group_name - (Optional) If commander, users can specify the name of the group.

<groupname 64> - If commander, users can specify the name of the group. The maximum

length is 64 characters.

candidate - Transfer role to candidate.

dp_interval - Specify the time in seconds between discoveries.

- Specify the time in seconds between discoveries.

hold_time - Specify the time in seconds the device holds the discovery result.