User manual

DAS-3626 VDSL2 Switch User Manual
To add an ACL Profile, click the Add ACL Profile button, which, will display the window below. There are four Access
Profile Configuration pages; one for Ethernet (or MAC address-based) profile configuration, one for IPv4 address-
based profile configuration, one for the Packet Content and one for IPv6. You can explore the four Access Profile
Configuration options by entering a Profile ID and Profile Name and using the radio button to select an ACL Type
and click Select. The user may remove all Access Profiles by clicking the Delete All button. The page shown below is
the Ethernet Access Profile Configuration page.
Figure 99. Add Access Profile (Ethernet)
If creating an Ethernet ACL enter the Profile ID and Profile Name and click Select the following window will appear.
Figure 100. Add Ethernet ACL Profile menu
Click on the boxes at the top of the table, which will then turn red and reveal parameters for configuration. To create a
new entry enter the correct information and click Create. To return to the Access Profile List page click Back.
86