User manual

20D-Link DHP-W310AV User Manual
Section 3 - Conguration
UseMAC(MediaAccessControl)FilterstoauthorizewirelessclientstoaccessyournetworkbytheirMACaddresses.Whenenabled,youcanchoose
to block the devices listed, or only allow the devices listed.
MAC Address Filter
MAC Filtering
Rules:
Description:
MAC Address:
Clear:
Save Settings:
Set MAC Filtering to ALLOW, DENY, or OFF.
ALLOW means only the devices listed can
access the network. DENY means the devices
listed cannot access the network. OFF means
this function is currently disabled.
You may make a note for your convenience,
such as “My PC” or “My friend’s smartphone”
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please
referto“NetworkingBasics”onpage54.Click
Save Settings to activate and save.
Note:If youarelteringtoALLOWonlythe
listed devices, make sure to add your own
computer to the list or you will be denied access
to the network and the conguration utility. If
you DENY the listed addresses be sure not to
include your computer.
Clear the rule from the list. Note you will have to save the settings in order for it to take eect.
Click Save Settings to save and activate the new changes.
Advanced