Systems Network Router User Manual

CHANGING PASSWORDS

The DI-701 contains 2 passwords, one for standard user access and one for Super Admin

access. Your ISP may have set Super Admin access if you purchased your unit through

them, and should not be changed in this case. For all other users it is recommended that you

change the default passwords to ensure that someone cannot adjust your settings without

your knowledge.

Changing the default passwords is a simple task just follow these steps:

1) Go to StartàRun

2) When the Run box appears, type “telnet 192.168.0.1 333”

(if your Local port IP address was changed during the

initial configuration, substitute the IP address you set for

“192.168.0.1”) and press enter:

3) You should see the following prompts, do as instructed in italics. Please note that

passwords are case sensitive, so be sure that you remember whether a letter is upper or lower

case and make sure that your Caps Lock is off:

D-Link DI-701, version 2.10

Administrator password : ******** Type “year2000”and press

<Enter>

ADMIN>passwd Type ‘passwd’ and press <Enter>

Please type old password : ******** Type “year2000”and

press <Enter>