Systems Network Router User Manual

renew

You must renew the global port configuration, after you have released it, to enable the

device. The ‘Show’ command enables you to see the configuration. The device will not work

until you have renewed the global port configuration.

Example:

command>renew

Update global port configuration

Note that if you choose NOT to obtain the global port

configuration from your ISP, this command won’t be

executed and the following message will appear.

Example:

command>renew

Works only if 'Obtain global port configuration from ISP'

is enabled

user

Displays the current active user(s), up to 128.

Example:

command>user

IP address Node address Remainder time Host name

----------------+---------------+---------------+---------

192.168.0.2 0040-3390-A1E3 0:36:54 Lotus

192.168.0.3 00E0-980A-4BF6 expired Pingc

192.168.0.4 0040-3324-332F 0:52:33 VICKY3

192.168.0.5 0040-3392-6155 0:31:46 Tree

192.168.0.6 00E0-9600-0001 0:36:38 DESKTOP

192.168.0.7 00E0-9817-01C5 0:45:26 Gary

192.168.0.8 0020-1834-6D3E expired Jeffrey98C