Specifications

113
Step 18 Follow these instructions to configure your Other DI-804HV using the exact
same settings for the IKE Proposal and the IPSec Proposal. Also make sure that
Step 4 is configured to reflect the LAN settings for what is now the Local DI-804HV
and that Steps 5 & 6 are configured to reflect the Subnet and WAN IP of what is now
the Remote DI-804HV
Step 19 To establish the connection, open a command prompt and ping an IP
address of a computer on the remote LAN. Once you receive replies the tunnel has
been established.
How can I set up my router to work with another DI-804HV router?
(continued)
Frequently Asked Questions (continued)
You need to first configure your DI-804HV router.
How can I set up my router to work with a DI-804V router?
Step 1 Log into the web based
configuration of the router by typing in
the IP address of the router (default:
192.168.0.1) in your web browser. By
default the username is “admin” and there
is no password.
Step 2 Click the VPN button on the left column, select the checkbox to Enable the
VPN, and then in the box next to Max. number of tunnels, enter the maximum numbers
of VPN tunnels that you would like to have connected.