Specifications

Home >VPN Settings > Dynamic VPN Tunnel

Using the Configuration Menu

Local Subnet-

The subnet of the VPN gateway’s local network. It can be a

host, a partial subnet or a whole subnet.

Local Netmask-

The netmask of the VPN gateway’s local network.

Aggressive Mode-

Enabling this mode will accelerate establishing the tunnel,

but the device will have less security.

Tunnel Name-

Current tunnel name.

This feature works with a VPN software client so the DI-804HV

does not need to know the IP address of the remote clients.

Dynamic VPN-

There are three parts that are necessary to setup the

configuration of IKE for the dedicated tunnel: basic setup, IKE

proposal setup, and IPSec proposal setup. Basic setup

includes the setting of following items: local subnet, local

netmask, remote subnet, remote netmask, remote gateway,

and pre-shared key. The tunnel name is derived from previous

page of VPN setting. IKE proposal setup includes the setting

of a set of frequent-used IKE proposals and selecting from the

set of IKE proposals.

VPN Settings - IKE-