Specifications

Using the Configuration Menu

Advanced > Firewall

Firewall Rules is an advance feature used to deny or allow traffic from passing through

the device. It works in the same way as IP Filters with additional settings. You can

create more detailed rules for the device.

Enabled or Disabled-

Click Enabled to apply the filter policy or click Disabled to enter an inactive filter policy

(You can reactivate the policy later).

Name-

Enter the name of the Firewall Rule.

Action-

Select Allow or Deny to allow or deny traffic to pass through the DI-804HV.

Source-

Choose between a LAN or WAN source. An asterisk signifies the selection of both

sources.

IP Start-

The starting IP address for the filter policy. Leaving the field blank selects all IPs.

IP End-

The ending IP address for the filter policy. Leaving the field blank sleects all IPs.

Destination-

Choose between a LAN or WAN destination. An asterisk signifies the selection of both

destinations.