Specifications

Using the Configuration Menu

Advanced > SNMP

SNMP (Simple Network Management Protocol) is a widely used network monitoring and

control protocol that reports activity on each network device to the administrator of the

network. SNMP can be used to monitor traffic and statistics of the DI-804HV. The DI-

804HV supports SNMP v1 or v2c

Enable SNMP-

Get Community-

(Simple Network Management Protocol)

Enter the password public in this field to allow “Read only” ac-

cess to network administration using SNMP. You can view the

network, but no configuration is possible wth this setting.

Set Community-

Enter the password private in this field to gain “Read and Write”

access to the network using SNMP software. The administra-

tor can configure the network with this setting.

Local-

Remote-

WAN (Wide Area Network)

LAN (Local Area Network)

SNMP v1-

Simple Network Management Protocol (SNMP) is an applica-

tion layer protocl that facilitates the exchange of management

information between nework devices.

SNMP v2-

Enhanced version of SNMP v1 with additional protocol opera-

tions such as UDP, IP, CLNS, DDP, and IPX.