Specifications

Using the Configuration Menu

Tools > Misc

Block WAN Ping-

Click Enable to block the WAN ping. Computers on the Internet

will not get a reply back from the DI-804HV when it is being

“ping”ed. This may help to increase security.

Restart Device-

Click Reboot to restart the unit.

Ping Test-

In the open box, enter an URL (i.e. www.dlink.com) or an IP ad-

dress and click on Ping to test your internet connection.

SPI Mode-

When this feature is enabled, the router will record the packet

information passed through the router such as IP address, port

address, ACK, SEQ number, and so on. The router will also

check every incoming packet to detect if it is valid.

DoS-

When DoS is enabled, the router will prevent Denial of Service

attacks on all computers connected to the DI-804HV.