User`s manual

13
In order to configure the Broadband Router you must input the
user-name into the User Name box. Enter the password into the Password
box and press the OK button. The default User Name is “Admin”. There is
no default password, leave the Password field blank.
Once you have logged-in as administrator, it is a good idea to change
the administrator password to ensure a secure connection to your Broadband
Router. The System Management section described later in this manual
describes how to change the password.
Once you have input the correct password and logged-in, the screen
will change to the Main Page screen.
If you are having problems logging in and you are sure that the
password you are using is correct, check the top right-hand corner of your
keyboard to make sure that the Caps Lock light is not on.