Operation Manual

22D-Link DIR-100 User Manual

Section 3 - Conﬁguration

Select Dynamic (most common) or Static. Select Static if

your ISP assigned you the IP address, subnet mask, gateway,

and DNS server addresses.

Enter the IP address (Static L2TP only).

Enter the Primary and Secondary DNS Server Addresses (Static

L2TP only).

Enter the Gateway IP Address provided by your ISP.

The DNS server information will be supplied by your ISP (Internet

Service Provider.)

Enter the Server IP provided by your ISP (optional).

Enter your L2TP account name.

Enter your L2TP password and then retype the password in the

next box.

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-

reconnect.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your speciﬁc ISP. 1492 is the default MTU.

Select either Always-on, Manual, or Connect-on demand.

L2TP:

IP Address:

Subnet Mask:

Gateway:

DNS:

Server IP:

L2TP Account:

L2TP Password:

Maximum Idle

Time:

MTU:

Connect Mode:

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and

password. This option is typically used for DSL services.

Internet Setup

L2TP