Operation Manual

28D-Link DIR-100 User Manual
Section 3 - Configuration
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these
applications work with the DIR-100.
Check the box to enabled the rule.
Enter a name for the rule.
This is the port used to trigger the application. It can
be either a single port or a range of ports.
This is the port number on the WAN side that will
be used to access the application. You may define a
single port or a range of ports. You can use a comma
to add multiple ports or port ranges.
Select TCP, UDP, or ANY.
Rule:
Name:
Trigger Port:
Firewall Port:
Traffic Type: