Specifications

42D-Link DIR-130 User Manual
Section 3 - Configuration
Enter a new password for the administrator login.
Only the administrator can make changes to the
settings.
Remote management allows the router to be
configured from the Internet by a web browser. A
username and password is still required to access
the Web-Management interface. In general, only a
member of your network can browse the built-in web
pages to perform Administrator tasks. This feature
enables you to perform Administrator tasks from
the remote (Internet) host.
Enter the IP address of the remote computer. You
may enter * to allow a connection from any Internet
address.
The port number used to access the DIR-130.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the
Internet IP address of the DIR-130 and 8080 is the
port used for the Web Management interface. The
schedule may be set to Always, which will allow the
filter to always be enabled. You can create your own
times in the Maintenance > Schedules section.
Admin Password:
Enable Remote
Management:
IP Address:
Port:
Administrator Settings
This page will allow you to change the Administrator password. You can also enable Remote Management.