Owner's manual

30D-Link DIR-615 User Manual

Section 3 - Conguration

Check the box to enable the wireless function.

If you do not want to use wireless, uncheck the

box to disable all the wireless functions.

Service Set Identier (SSID) is the name of your

wireless network. Create a name using up to 32

characters. The SSID is case-sensitive.

The Auto Channel Scan setting can be selected

to allow the DIR-615 to choose the channel with

the least amount of interference.

Indicates the channel setting for the DIR-615.

By default the channel is set to 6. The Channel

can be changed to t the channel setting for an

existing wireless network or to customize the

wireless network. If you enable Auto Channel

Scan, this option will be greyed out.

Select one of the following:

802.11g Only - Select if all of your wireless

clients are 802.11g.

Mixed 802.11g and 802.11b - Select if you

are using both 802.11b and 802.11g wireless

clients.

802.11b Only - Select if all of your wireless

clients are 802.11b.

802.11n Only - Select only if all of your wireless clients are 802.11n.

Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.

Select the Channel Width:

Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz - Select if you are not using any 802.11n wireless clients.

Enable Wireless:

Enable Auto

Channel Scan:

Manual Conﬁguration

Wireless Network

Name:

Wireless Channel:

802.11 Mode:

Channel Width: