Owner's manual
48D-Link DIR-615 User Manual
Section 3 - Conguration
Set the transmit power of the antennas.
Beacons are packets sent by an
Access Point to synchronize a wireless
network. Specify a value. 100 is the
default setting and is recommended.
This value should remain at its default setting
of 2432. If inconsistent data ow is a problem,
only a minor modication should be made.
The fragmentation threshold, which is
specied in bytes, determines whether packets
will be fragmented. Packets exceeding the
2346 byte setting will be fragmented before
transmission. 2346 is the default setting.
(Delivery Trafc Indication Message) 3 is
the default setting. A DTIM is a countdown
informing clients of the next window for
listening to broadcast and multicast messages.
This enables 802.11d operation.
802.11d is a wireless specication developed to allow implementation of wireless networks in countries that
cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Check this box to reduce the guard interval time therefore increasing the data
capacity. However, it’s less reliable and may create higher data loss.
Transmit Power:
Beacon Period:
RTS Threshold:
Fragmentation
Threshold:
DTIM Interval:
802.11d:
WMM Function:
Short GI:
Advanced Wireless Settings