Owner's manual

50D-Link DIR-615 User Manual
Section 3 - Conguration
This Wizard helps you add wireless devices to the wireless network.
The wizard will either display the wireless network settings to guide you through manual conguration, prompt you to enter the
PIN for the device, or ask you to press the conguration button on the device. If the device supports Wi-Fi Protected Setup
and has a conguration button, you can add it to the network by pressing the conguration button on the device and then
the on the router within 60 seconds. The status LED on the router will ash three times if the device has been successfully
added to the network.
There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A
registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected
Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as
well.
Click to add a wireless client to your network. Please refer to page 79 for more informa
Add Wireless
Station:
Add Wireless
Device Wizard: