Version 1.
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1.0 Date June 24, 2013 Description Initial Release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Table of Contents Table of Contents Preface...........................................................................................i Manual Revisions............................................................................ i Trademarks....................................................................................... i Product Overview.......................................................................1 Package Contents..........................................................................
Table of Contents Wireless Security...................................................................... 47 What is WEP?.................................................................................47 What is WPA?.................................................................................47 Configuring WEP..........................................................................48 Configuring WPA/WPA2-Personal (PSK)..............................49 Configuring WPA/WPA2-Enterprise (PSK).............
Section 1 - Product Overview Product PackageOverview Contents D-Link DIR-610N Wireless N 150 Home Router Power Adapter Ethernet Cable Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the D-Link DIR-610N will cause damage and void the warranty for this product. Always attach the power cord plug to the power supply before inserting the power cord and connected power supply to the wall outlet.
Section 1 - Product Overview System Requirements Network Requirements • An Ethernet-based Cable or DSL modem • IEEE 802.11n/g/b wireless clients Computer with the following: • Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapter Web-based Configuration Utility Requirements D-Link DIR-610N User Manual Browser Requirements: • Internet Explorer 8.0 or later • Firefox 12.0 or later • Safari 4.0 or later (with Java 1.3.1 or higher) • Chrome 20.
Section 1 - Product Overview Features • Faster Wireless Networking - The D-Link DIR-610N provides up to 150 Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. • Compatible with 802.11g Devices - The D-Link DIR-610N is still fully compatible with the IEEE 802.11g standard, so it can connect with existing 802.11g and 802.11b wireless adapters.
Section 1 - Product Overview Hardware Overview Connections 1 2 3 5 4 ID Component 1 2 3 4 5 LAN Ports Internet Port Reset Button Power Receptor WPS Button D-Link DIR-610N User Manual Description Connect up to 4 wired devices for fast Ethernet connections Plug your broadband modem in to share your Internet connection Return the router’s settings to the factory defaults Plug in the supplied power adapter Press this button to add wireless devices using WPS 4
Section 1 - Product Overview Hardware Overview LEDs 1 2 ID Component Status 1 Power LED 2 Internet LED Solid Flashing Solid Flashing D-Link DIR-610N User Manual Indication Indicates a proper connection to the power supply. WPS connection is being established Connection on the Internet port.
Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet or cabinet, or in the attic or garage. Before you Begin • Please configure the router with the computer that was last directly connected to your modem. • You can only use the Ethernet port on your modem.
Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.
Section 2 - Installation Connect to Cable/DSL/Satellite Modem If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below: 1. Place the router in an open and central location. Do not plug the power adapter into the router. 2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down your computer. 3.
Section 3 - Configuration Configuration This section will show you how to configure your D-Link wireless router using the web-based configuration utility. To access the Easy Setup Wizard or configuration utility, open a web browser such as Internet Explorer and enter http://dlinkrouter. You can also enter the IP address of the router (http://192.168.0.1). A login screen will appear. Select the administrator (admin) login name from the drop-down menu. By default, the password field should be left blank.
Section 3 - Configuration Easy Setup Wizard When you log in to the router for the first time, the router will automatically attempt to detect your Internet connection type. Once the Internet type has been detected, you may be prompted to enter additional information such as a username and password (PPPoE). After your Internet connection has been set up, the following page will appear, showing a summary of the router’s Internet, wireless, and admin settings.
Section 3 - Configuration Internet Connection Setup Wizard Internet Select your Internet connection type from the drop-down menu. Connection: User Name: If you selected PPPoE, enter your PPPoE user name. Password: If you selected PPPoE, enter your PPPoE password.
Section 3 - Configuration Wireless Security Wizard Click Configure under Wireless Settings to begin the wireless security configuration wizard. Click Configure under Wireless Settings to begin the wireless security configuration wizard. Network Name Enter the desired network name to identify your wireless network. (SSID): Security Mode: Select the security method to be used to secure the wireless network. It is strongly recommended that you select the AutoWPA/WPA2 method.
Section 3 - Configuration Manual Configuration Internet If you wish to configure your Internet connection manually, click on the Manual Internet Connection Setup button on the Setup > Internet page. You will be redirected to the configuration page that allows you to select the type of your Internet connection and enter the correct configuration parameters. Enable Access Check the box to enable access point mode.
Section 3 - Configuration Static IP Address Choose Static IP Address if your ISP has provided you with a full set of IP address information. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP format, which is four octets each separated by a dot (x.x.x.x). The router will not accept an IP address if it is not in this format.
Section 3 - Configuration Dynamic IP Address (DHCP) My Internet Select Dynamic IP (DHCP) to obtain IP address information Connection is: automatically from your ISP. Select this option if your ISP did not provide you with any IP numbers to use. This option is commonly used for cable modem services. Host Name: The host name is optional but may be required by some ISPs. Primary DNS Enter the primary DNS server address provided to you by your ISP.
Section 3 - Configuration PPPoE Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure you remove any PPPoE software from your computer. The software is no longer needed and will not work through a router. My Internet Select PPPoE (Username/Password) from the drop-down menu.
Section 3 - Configuration Primary DNS If you selected Enter DNS Manually above, enter the primary DNS Server: server address supplied by your ISP (Internet Service Provider). Secondary If you selected Enter DNS Manually above, enter the secondary DNS Server: DNS server address supplied by your ISP (Internet Service Provider). This is optional, but may provide more stability should the primary DNS server fail.
Section 3 - Configuration Wireless Settings From the Wireless Settings page, you can choose how you wish to set up your wireless network. To add a device using Wi-Fi Protected Setup (WPS), click on the Add Wireless Device with WPS button. If you want to manually configure the wireless settings on your router click Manual Wireless Network Setup and refer to”Manual Wireless Network Setup” on page 21.
Section 3 - Configuration Add Wireless Device with WPS Wi-Fi Protected Setup (WPS) allows you to quickly and securely add compatible wireless devices to you wireless network. If your wireless device supports WPS, you can use this method to add it to your wireless network. Auto: Select this option if the device that you want to add to your wireless network supports WPS. Manual: Select this option if the device that you want to add to your wireless network does not support WPS.
Section 3 - Configuration If you selected Manual as your configuration method in the previous step, a summary will appear showing the current wireless network configuration. You should manually enter this information on your wireless client in order to join the wireless network.
Section 3 - Configuration Manual Wireless Network Setup From the Wireless Network page, you can manually configure your wireless network settings. At any time, you can click the Save settings button to save the current configuration and return to the main page, or click Don’t Save Settings to discard any changes and return to the main page. If you wish to enable WDS in order to extend an existing wireless network, the following options will be available for configuration.
Section 3 - Configuration Extended The security settings for the extended network will be the same Wireless as those for the source network and cannot be changed. Security Mode: Pre-Shared Key The pre-shared key for the extended network will be the same as the source network and cannot be changed. Click Save Settings to save the current configuration, or click Don’t Save Settings to discard any changes that have been made.
Section 3 - Configuration If you do not wish to enable WDS, you can configure the wireless settings of your router on this page. The following options will be available for configuration. Wireless Band: The frequency of the wireless band being configured. Enable Wireless: Check this box to enable the wireless function of your router. Wireless Network The network name (SSID) of your wireless network. This name will Name: identify your wireless network. 802.11 Mode: Select one of the following: 802.
Section 3 - Configuration clients will be able to see your wireless network name when they perform a site scan. Select Invisible to prevent the router from broadcasting your SSID. In this case, wireless clients will need to manually enter the name of your wireless network in order to connect to it. Wireless Select your preferred mode of wireless security. For more Security information regarding how to set up wireless security, please refer Mode: to “Wireless Security” on page 47.
Section 3 - Configuration Network Settings This section will allow you to configure the local network settings of the router. At any time, you can click the Save settings button to save the current configuration and return to the main page, or click Don’t Save Settings to discard any changes and return to the main page. Router IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1.
Section 3 - Configuration DHCP Server Settings The DIR-610N has a built-in Dynamic Host Control Protocol (DHCP) server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/ IP settings to “Obtain an IP Address Automatically”. When clients connect to the network, they will automatically retrieve the TCP/IP settings provided by the router.
Section 3 - Configuration DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range. Checkbox: Check the box to the left of the rule to enable DHCP reservations. Computer Name: Enter the name to identify the computer to which you would like to apply the DHCP reservation.
Section 3 - Configuration Advanced Virtual Server The D-Link DIR-610N can be configured as a virtual server so that remote users accessing web or FTP services via a public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The firewall feature filters out unrecognized packets to protect your LAN so all computers networked with the router are invisible to the outside world.
Section 3 - Configuration This will allow you to open a single port. If you would like to open a range of ports, refer to”Port Forwarding” on page 30. Checkbox: Check the box to the left of the rule to activate that particular virtual server rule. Name: Enter a name to identify the rule, or select an application from the drop-down menu and click << to automatically populate the fields. IP Address: Enter the IP address of the computer on your local network that you want to allow the incoming service to.
Section 3 - Configuration Port Forwarding Some applications such as multi-player games, media streaming services, and P2P connections require ports to be opened in order to direct incoming packets to the correct computer on your network. The Port Forwarding option will allow you to open a single port or a range of ports. Checkbox: Check the box to the left of the rule to activate that particular port forwarding rule.
Section 3 - Configuration Network Filters Network Filters uses MAC (Media Access Control) addresses to allow or deny LAN (Local Area Network) computers from accessing your network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the router. Configure MAC Select Turn MAC Filtering Off, Allow MAC addresses listed Filtering: below, or Deny MAC addresses listed below from the dropdown menu.
Section 3 - Configuration Website Filter Website filters are used to allow you to set up a list of allowed or denied web sites that can be used by multiple users through the network. To use this feature select Allow or Deny, enter the domain or website and click Add, and then click Save Settings. For website filters to be enabled, you must also select Apply Web Filter under the required policies in the Access Control section. Configure Select Allow or Deny computers access to only these sites.
Section 3 - Configuration Firewall Settings A firewall protects your network from the outside world. The DIR-610N offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed completely to the Internet for certain types of applications. If you choose to expose a computer, you can enable DMZ (Demilitarized Zone). This option will completely expose the chosen computer to the Internet.
Section 3 - Configuration Advanced Wireless Settings This section allows you to configure the advanced setting for the wireless network. The wireless band for this network is fixed at 2.4 GHz. Transmit Power: Set the transmit power of the antennas. WMM Enable: WMM is QoS (Quality of Service) for your wireless network. This can improve the quality of video and voice applications for your wireless clients. Short Guard Check this box to reduce the guard interval time, which can Interval: increase throughput.
Section 3 - Configuration Wi-Fi Protected Setup Wi-Fi Protected Setup (WPS) is a simplified method for securing your wireless network during the “Initial Setup” and “Add New Device” processes. The Wi-Fi Alliance (WFA) has certified it across different products and manufacturers. The process is as quick and easy as simply pushing a button (the Push-Button Method) or entering the correct 8-digit code (the PIN-Code Method). The most effective security setting, WPA2, is used automatically.
Section 3 - Configuration Advanced Network Settings UPnP Settings: To use the Universal Plug and Play (UPnP) feature click Enable UPnP. UPnP provides compatibility with networking equipment, software and peripherals. Enable WAN Unchecking the box will not allow the router to respond to pings. Ping Response: Blocking the ping may provide some extra security from external threats. Check the box to allow the Internet port to be “pinged”.
Section 3 - Configuration Tools Administrator Settings This page will allow you to change the administrator password and configure remote management of your router. You can also enable Remote Management. At any time during the setup process, you can click Save Settings to save the current configuration, or click Don’t Save Settings to discard any changes. Admin Password: Enter a new password for the Administrator account. The administrator can make changes to the settings.
Section 3 - Configuration Time and Date The Time and Date configuration option allows you to configure, update, and maintain the correct time on the internal system clock. In this section you can set the time zone that you are in and set the time server. Daylight saving can also be configured to automatically adjust the time when needed. Time: Displays the current system time and date. Time Zone: Select your current time zone from the drop-down menu.
Section 3 - Configuration System Save Settings Use this option to save the current router configuration settings to Local Hard to a file on the hard disk of the computer you are using. First, click Drive: the Save button. You will then see a ‘save file’ dialog, where you can select a location and file name for the settings. Load Settings Use this option to load previously saved router configuration from Local Hard settings.
Section 3 - Configuration Firmware You can upgrade the firmware of the router here. Make sure the firmware file you want to use is on the local hard drive of the computer. Please check your local D-Link support site or http://support.dlink.com for firmware updates and language packs. Firmware Displays the current firmware version and date. Click on the Check Information: Now button to check for any new firmware updates.
Section 3 - Configuration Dynamic DNS The DDNS feature allows you to host a server (web, FTP, game server, etc.) using a domain name that you have purchased (www.yourdomain.com) with your dynamically assigned IP address. Most broadband Internet service providers assign dynamic (changing) IP addresses. Using a DDNS service provider, users can enter in your domain name to connect to your server regardless of your IP address. Enable DDNS: Check the box to enable the DDNS function.
Section 3 - Configuration Status Device Information This page displays the current information for the router. It will display the LAN, WAN (Internet), and Wireless information. Status information will be shown in the following categories: General: Displays the router’s time and date, as well as the current firmware version and release date. WAN: Displays the current type of WAN (Internet) connection, and its status.
Section 3 - Configuration Logs The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted while logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of the events to view.
Section 3 - Configuration Internet Sessions The Internet Sessions page displays the full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. Refresh: Click to refresh the table. NAPT Sessions: Shows statistics of TCP and UDP sessions. NAPT Active Shows the details of sessions on machines currently connected to Sessions: the router.
Section 3 - Configuration Wireless The wireless client table displays a list of currently connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients.
Section 3 - Configuration Support The Support section provides detailed information on each section of the router’s web-based configuration interface. Use the hyperlinks to navigate to the information required.
Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your network from unauthorized access. The D-Link DIR-610N offers the following types of security: • Wired Equivalent Privacy (WEP) • Wi-Fi Protected Access (WPA/WPA2) - Personal • Wi-Fi Protected Access (WPA/WPA2) - Enterprise What is WEP? Wired Equivalent Privacy (WEP) is an older form of wireless encryption which operates only in 802.11g legacy mode.
Section 4 - Security Configuring WEP Security Mode: Select WEP from the drop-down menu. WEP Key Length: Select the desired length of the WEP key to be used. In general, a longer key will be more secure than a shorter one. If you select 64 Bit, the key should consist of 10 hexadecimal digits (0-9 and A-F). You can also enter a key of 5 ASCII characters (0-9, A-Z, and symbols). If you select 128 Bit, the key should consist of 26 hexadecimal digits, or 13 ASCII characters.
Section 4 - Security Configuring WPA/WPA2-Personal (PSK) WPA-Personal is a more modern standard for wireless security on home networks. The WPA standard uses a pre-shared alphanumeric key for authentication. WPA2 is a more recent update to the WPA standard and currently provides the highest level of wireless security for home and personal networks. Security Mode: Select WPA-Personal from the drop-down menu. WPA Mode: Select the desired WPA mode from the drop-down menu.
Section 4 - Security Configuring WPA/WPA2-Enterprise (PSK) WPA-Enterprise uses the WPA security standard for the security of larger, enterprise-level networks. WPA-Enterprise uses the 802.1x standard to authenticate clients through a remote RADIUS server, therefore providing an increased level of security for large networks. Contact your network administrator if you do not have all of the information required for this configuration. Security Mode: Select WPA-Enterprise from the drop-down menu.
Section 4 - Security Advanced: Click Advanced to display the optional settings for a backup RADIUS server. Second RADIUS Enter the IP address of the backup remote RADIUS server. Server IP Address: Second RADIUS Enter the port of the backup remote RADIUS server. Server Port: Second RADIUS Enter the pre-shared secret (password) for the backup remote Server Shared RADIUS server. Wireless clients will need this password in order Secret: to access the network.
Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Windows® 8 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display.
Section 5 - Connecting to a Wireless Network You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function.
Section 5 - Connecting to a Wireless Network Using Windows® 7 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area.
Section 5 - Connecting to a Wireless Network 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router.
Section 5 - Connecting to a Wireless Network 5. Enter the same security key or passphrase that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
Section 5 - Connecting to a Wireless Network Using Windows® XP Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.
Section 5 - Connecting to a Wireless Network Configure WPA-PSK It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used. 1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2.
Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPAPSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router.
Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the D-Link DIR-610N. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screen shots on your computer will look similar to the following examples.) 1.
Section 6 - Troubleshooting • Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
Section 6 - Troubleshooting 3. Why can’t I connect to certain sites or send and receive e-mails when connecting through my router? If you are having a problem sending or receiving e-mail, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (e.g. 1492, 1482, 1472, etc). Note: AOL DSL+ users must use an MTU of 1400. To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to.
Section 6 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, let’s say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network you’re working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size.
Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Appendix A - Wireless Basics Tips Here are a few things to keep in mind when you install a wireless network. Centralize Your Router or Access Point For best performance, try to place the router/access point in a centralized location within your desired coverage area. Try to place the router/access point as high as possible in the room so the signal gets dispersed throughout your home.
Appendix A - Wireless Basics Wireless Modes There are two basic modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router. • Ad-Hoc – Directly connecting to another computer for peer-to-peer communication, using wireless network adapters on each computer. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.
Appendix B - Networking Basics Networking Basics Check your IP address After you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. • Click on Start > Run. In the run box type cmd and click OK. (Windows 8/7/Vista® users can also type cmd in the Start > Search box.) • At the prompt, type ipconfig and press Enter.
Appendix B - Networking Basics Check Your MAC Address A Media Access Control (MAC) address is a unique identifier assigned to network adapters to identify them on a network. MAC addresses are also useful for identifying the devices attached to network adapters. If you need to find out your computer’s MAC, follow the steps below: • Click on Start > Run. In the run box type cmd and click OK. (Windows 8/7/Vista® users can also type cmd in the Start > Search box.
Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router or you need to assign a static IP address, please follow the steps below: Step 1 Windows Vista® Windows® XP Windows® 2000 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Click on Start > Control Panel > Network Connections. From the desktop, right-click My Network Places > Properties.
Appendix C - Technical Specifications Technical Specifications Interface • 10/100 Mbps RJ-45 Ethernet LAN Port x 4 • 10/100 Mbps RJ-45 Ethernet WAN Port x 1 • 802.11g/b wireless LAN • 802.11n compatible wireless LAN LEDs • Power • Internet Standards • IEEE 802.11n compatible • IEEE 802.11g • IEEE 802.11b • IEEE 802.3 • IEEE 802.3u Security • WPA/WEP2 -- Personal -- Enterprise Wireless Signal Rates* • 802.11n - Up to 150 Mbps • 802.11g - Up to 54 Mbps • 802.
Appendix D - Safety Statements Safety Statements CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
