User Manual
18D-Link DIR-813 User Manual
Section 3 - Conguration
Select Dynamic (most common) or Static. Select Static if your
ISP assigned you the IP address, subnet mask, gateway, and DNS
server addresses.
Enter the IP address (Static PPTP only).
Enter the Primary and Secondary DNS Server Addresses (Static
PPTP only).
Enter the Gateway IP Address provided by your ISP.
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
The default MAC Address is set to the WAN’s physical interface MAC
address on the Broadband Router.
You can click the Copy Your PC’s MAC Address button to copy the
MAC address of the Ethernet adapter installed in your computer
to the router.
Enter the Server IP provided by your ISP (optional).
Enter your PPTP account name.
Enter your PPTP password and then retype the password in the
Conrm Password box.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Maximum Transmission Unit - You may need to change the MTU
for optimal performance.
Select Always on for most ISPs or select Manual or Connection
on demand.
PPTP:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway:
Primary DNS
Server:
MAC Address:
Copy Your PC’s
MAC Address:
PPTP Server IP:
User Name:
Password:
Maximum Idle
Time:
MTU:
Connection Mode
Select:
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password.