User Manual

27D-Link DIR-813 User Manual
Section 3 - Conguration
Port Forwarding
This will allow you to open a single port or a range of ports.
Check the box to enabled the rule.
Enter a name for the rule.
You may select a pre-dened rule from the drop-down menu.
Select a rule and then click << to populate the required elds.
Enter the IP address of the computer on your local network
that you want to allow the incoming service to.
Select a computer or device on your network from the drop-
down menu and then click << to populate the required elds.
Enter the port or range of ports that you want to open. If you
want to open one port, enter the same port in both boxes.
In most cases the Public and Private ports will be exactly the
same.
Select TCP, UDP, or Any.
Enable:
Name:
Application
Name:
IP Address:
Computer
Name:
Start Port/
End Port:
Trac Type: