User Manual

29D-Link DIR-813 User Manual
Section 3 - Conguration
MAC Filtering
Select Turn MAC Filtering OFF, Turn MAC Filtering ON and
ALLOW computers listed to access the network, or Turn
MAC Filtering ON and DENY computers listed to access
the network.
Check the box to the left of the lter to enable.
Enter the MAC address you would like to lter. To nd the
MAC address on a computer, please refer to the Networking
Basics section in this manual.
Select a DHCP client from the drop-down menu and click the
<< button to populate the required elds.
Congure MAC
Filter:
Enable:
MAC Address:
DHCP Client
List:
Use MAC Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network.
You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to
the Router.