User Manual
33D-Link DIR-813 User Manual
Section 3 - Conguration
Set the transmit power of the antennas.
Select one of the following:
Mixed 802.11g and 802.11b - Select if you are using both 802.11b
and 802.11g wireless clients.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11n, 802.11b, and 802.11g - Select if you are using
a mix of 802.11n, 11g, and 11b wireless clients.
Select the Band Width:
Auto 20/40 (Auto) - Select if you are using both 802.11n and non-
802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
This is the default setting.
Enable this option to reduce interference from other wireless
networks in your area. If the channel width is operating at 40MHz
and there is another wireless network’s channel over-lapping
and causing interference, the router will automatically change to
20MHz.
Transmit Power:
Wireless Mode:
Band Width:
20/40MHz
Coexist:
Advanced Wireless 2.4GHz
This section allows you to change the behavior of the 2.4GHz wireless radio from the standard settings. Please be aware that any changes to the
factory default settings may adversely aect the behavior of your network.