Datasheet

ManualsBrandsD-Link ManualsOtherDPH-540

DPH-400S Series IP Phone Specifications

External Engineering Spec

For

DPH-400S Series IP Phones

Model Name:

D-link DPH-400S / 400SE / 400SEDM

Version: 1.0

2007/08/04

By: Olivia Lo / D-Link / Product Planning

This document contains Confidential & Proprietary information and is the property of D-Link Corporation. The contents

Page 1 of 14

Summary of content (14 pages)

PAGE 1
DPH-400S Series IP Phone Specifications External Engineering Spec For DPH-400S Series IP Phones Model Name: D-link DPH-400S / 400SE / 400SEDM Version: 1.0 2007/08/04 By: Olivia Lo / D-Link / Product Planning This document contains Confidential & Proprietary information and is the property of D-Link Corporation. The contents D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
PAGE 2
DPH-400S Series IP Phone Specifications of this document may not be disclosed to unauthorized persons without the written consent of D-Link Corporation. D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
PAGE 3
DPH-400S Series IP Phone Specifications DPH-400S Series IP Phone : Revision History Version Revised Date Person Name 1.0 2007/08/04 Olivia Lo Content Revised Initial Release D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
PAGE 4
DPH-400S Series IP Phone Specifications 1.0 Product Introduction DPH-400S series IP Phones are mainly designed for general office users (from VSE, SOHO to SMB) in VoIP communication. With sophisticated and elegant design, this platform has high performance and can offer versatile features and specifications to meet different environment requirements.
PAGE 5
DPH-400S Series IP Phone Specifications 2.2 The Layout of I/O Ports Reset button: to return to system default setting LAN Port: to connect to 10/100Mbps Ethernet (toward Internet) PC Port: to connect to 10/100Mbps Ethernet (toward a local PC ) 5V DC IN Jack : to connect to local power with a switching power adaptor.
PAGE 6
DPH-400S Series IP Phone Specifications 3.0 Hardware & Physical Specifications Hardware: Model DPH-400S DPH-400SE DPH-400SEDM Description Standard SIP phone with Power Adaptor support only With both Power Adaptor and PoE support Complaint to the standard: IEEE802.3af PoE function Optional Extended Dial Module for speed dial, D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
PAGE 7
DPH-400S Series IP Phone Specifications Key Components CPU DSP SDRAM Flash Port Name LAN PC abbreviated code, programmable features assignment use. Description Broadcom BCM1113 ZSP processor inside BCM1113 16MB 4MB Functions 1 x 10/100 BaseT ports RJ45 Compliant to following standards: 1. IEEE 802.3/802.3u 2. Support Full-Duplex operations 3. IEEE802.3af PoE function (option) 1 x 10/100 BaseT ports Compliant to following standards: 1. IEEE 802.3 2.
PAGE 8
DPH-400S Series IP Phone Specifications Part Item Name Description Operating System WindRiver VxWorks SIP Stack RadVision SIP stack Software Platform Broadcom BSP Software Requirement Description Browser for Web of Phone Microsoft Windows IE, or Auto Provisioning Server PC-based general web browser General compatible TFTP or FTP Server Software Software Specifications: Main Parts                             Specification Details Keypad Features Volume Control for Ringer,
PAGE 9
DPH-400S Series IP Phone Specifications                                         G.726 G.729A/B(8 k bps) (*Optional) G.723.1 (*Optional) BroadVoice16/32 (*Optional) Advance Voice Quality Feature Silence Suppression Acoustic Echo Cancellation (G.
PAGE 10
DPH-400S Series IP Phone Specifications   APS auto-provisioning for firmware and profile upgrade Emergency upgrade if firmware corrupted 5.0 Audio Platform Specifications  To be compliant to the Audio standard: TIA/EIA -810-A. Send Frequency Response: The send frequency response shall be below the upper limit and above the lower limit is shown in Figure below.
PAGE 11
DPH-400S Series IP Phone Specifications     6.0 Send Noise: less than -68 dB. Send Single Frequency Interference: less than -78 dB. Receive Noise: less than 38 dB. Receive Single Frequency Interference: 10 dB quieter than the A-weighted broadband noise floor. Certifications/Test Reports Requirement EMC/RF Certificates and Test Reports EMC Test Report Class A CE Report (EN55022/55024) FCC Report (FCC CFR 47, Part 15B/ ICES-003) RoHS WEEE Safety Certificates and Test Reports Certifications 7.
PAGE 12
DPH-400S Series IP Phone Specifications DPH-400SE 1 x IP phone main set 1 x Handset Cord 1 x Handset 1 x Quick Install Guide (paper printed) 1 x CD-ROM 1 x 1.5m Ethernet CAT5 Cable 1 x Wall-mount kit pack (Screws) 1 x Switching power adaptor (optional for different country/area) 1 x Gift box Unit Packing Weight: 1.70Kg Size of Gift box: 367mm x 117mm x 228mm The number of unit per carton: 6pcs DPH-400SEDM Carton Packing Weight: 11.
PAGE 13
DPH-400S Series IP Phone Specifications TECOM SIP Phone TECOM Mobile phones SNOM SIP Phone Thomson France Telecom R&D Institute of Information Industry Sharp Corporation ST Microelectronics Texas Instruments (Telogy Networks) Mitel GradndStream Xten Soft phone Microsoft Soft phone Windows XP messenger Vovida-SIP-SoftPhone Vovida Soft phone Pingtel SIP phone Siemens SIP phone Siemens SCS-Client Product - SIP Gateway Companies D-link Cisco Trunk Gateway Cisco small SIP Gateway TECOM ATA (Router) SXD small Ga
PAGE 14
DPH-400S Series IP Phone Specifications D-Link IPPBX System TECOM Broadsoft Softswitch Cisco Digium Sylantro Comverse (NetCentrex) Briadvox HuaWei Nortel Softswitch Vonage OKI IP-PBX ipTel.org SIP Server Vovida SIP Server RadVision PartySIP OnDo Hotsip Free World Dialup Fusion Polycomm Radvision Prolab Ubiquity Alcatel NexTone Communications, Inc. Vertical Tadiran Ridgeway Systems & Software DVX-1000, DVX-2000MS, DVX-4010 IG6000, IPX4000 BroadWorks R13.