User manual

DSL-2500U ADSL/Ethernet Router
User Manual
Configuring via Web-based Interface
Parameter Description
General settings
Name A name for connection for easier identification.
Connection Type
A type of network protocol to be used by the connection. Available
values:
• PPPoA
• PPPoE
• IPoE
• IPoA
• Bridge.
Enable Select the checkbox to enable the connection.
Direction The direction of this connection.
Physical layer
Physical interface
A physical or virtual interface to which the new connection will be
assigned. Leave the Create value to create a new interface at the
physical layer.
VPI
Virtual Path Identifier. The valid range is from 0 to 250.
VCI
Virtual Circuit Identifier. The valid range is from 32 to 65535.
Encapsulation Mode Select LLC or VC from the drop-down list.
Page 29 of 63