Install guide

Setting Up Your

Setting Up Your Setting Up Your

Setting Up Your

D-

-Link DSL 2640B

Link DSL 2640BLink DSL 2640B

Link DSL 2640B

Wireless Router

Wireless RouterWireless Router

Wireless Router

Read this first

Read this firstRead this first

Read this first

Item code: 048370

PAGE 1
Item code: 048370 Setting Up Your D-Link DSL 2640B Wireless Router Read this first
PAGE 2
Item code: 048370 Fitting your microfilters Introduction 1) Plug a microfilter into your telephone socket. If you had to unplug something, you can plug it back into the “Phone” socket of the microfilter. It’s best to leave it out until you’ve got everything working though. Hello, thanks for choosing our wireless router. With this guide we’ll take you through the setup. Don’t let all the wires intimidate you, putting it together is a piece of cake.
PAGE 3
Item code: 048370 Troubleshooting Status Lights Does a Windows dial-up networking screen appear when you try to connect to the Internet? Power State Off Router not powered, check power cable and power socket You need to stop your computer from trying to use the dial-up settings, which are often used by USB broadband modems.
PAGE 4
Item code: 048370 5) First you’ll be asked to asked to change the routers password. Make sure you can remember this as you’ll need it each time you want to log in to the D-Link homepage. 8) Finally click Restart. Item code: 048370 Setting Up Wireless Security 1) Open up a web browser (such as Internet Explorer), in the address line type in “192.168.1.1”, then press Enter. 9) You’ll see a progress bar that shows you how long the reboot takes. If you don’t change the password it will be set as admin.