User manual

Section 2 - Installation

D-Link DSL-2740U User Manual

Hub or Switch to Router Connection

Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch

with a straight-through cable as shown in this diagram. If you wish to reserve

the uplink port on the switch or hub for another device, connect to any on the

other MDI-X ports (1x, 2x, etc.) with a crossed cable.

Computer to Router Connection

You can connect the Router directly to a 10/100BASE-TX Ethernet adapter

card (NIC) installed on a PC using the Ethernet cable provided as shown in

this diagram.

DSL-2740U