Hardware reference guide

DSN-2100 Hardware Reference Guide 35
A.5 Replacing a Power Supply
The xStack Storage Array contains three user replaceable power supply modules. They can
be replaced as follows.
1. Locate the failed power supply module. Unscrew the bolt holding the locking
mechanism in place as shown in Figure A-19.
Figure A-19 Unscrew the Bolt Holding the Locking Mechanism
2. Push the locking lever to the left and pull on the handle as shown in Figure A-20.
Figure A-20 Push the Locking Lever to the Left and Pull Handle
3. Remove the power supply module as shown in Figure A-21.