Hardware reference guide

14 Chapter 2 DSN-3000 series Layout
2.2 Back Panel Components
The rear of the DSN-3000 series storage system enclosure has the following components:
 (DSN-3200)Eight 1 GbE RJ-45 iSCSI host network data ports. Each iSCSI data port has
port speed and port activity LEDs. (see Figure 2-2, Figure 2-4 and Table 2-4)
 (DSN-3400)One 1 GbE RJ-45 iSCSI host network data port. This iSCSI data port has port
speed and port activity LEDs. (see Figure 2-2, Figure 2-6 and Table 2-6)
 Diagnostic port (Diagnostic Port) - one 9600 bps RS-232-C DB9 diagnostic port is located
to the right of the iSCSI data ports. This requires a female-to-female straight-through
cable provided with the system. (see Figure 2-4 for the DSN-3200 and Figure 2-6 for the
DSN-3400)
 Management port (Mgmt 10/100) - one 10/100 RJ-45 management is located to the right
of the diagnostic port. The management port has port speed and port activity LEDs. (see
Figure 2-2, Figure 2-4 and Figure 2-6)
 Power switch and reset switch – are located above the external interfaces (see Figure
2-2, Figure 2-3 and Table 2-3).
 Power - three power receptacles are located on the right side of the rear panel.
 Power supply alarm silence button – located on the rear of the power supply. (see
Figure 2-2)
Figure 2-2 Rear View of the xStack Storage DSN-3200 Enclosure
Power Supply Alarm
Silence Button