mydlink™ Wi-Fi Smart Plug DSP-W215 Quick Install Guide
Package Contents DSP-W215 mydlink Wi-Fi Smart Plug Quick Install Guide Quick Install Card If any of the above items are missing, please contact your reseller. Minimum Requirements General Requirements: • Wireless router (802.11ac/802.11n) with Internet Service • An available power outlet Mobile Requirements: • Mobile device or tablet with iOS 6.0 or above, Android 4.0 or above mydlink Requirements: • For mydlink and mydlink app requirements refer to: http://www.mydlink.com © 2014 D-Link.
Safety 1. Do not open the device or attempt to repair or service it. 2. Use the device in a dry location, and avoid placing it in a humid environment. 3. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect from the power outlet and use a damp towel. 4. This device should only be used indoors. Before you Begin Plan the location of your Smart Plug devices: 1.
Hardware Overview Front View ON/OFF Button Status LED WPS/Reset Button Power LED Outlet WPS Press for one second to start the WPS connection process. The Status LED will start to blink green. Reset Press and hold until the Status LED turns red in order to reset the device back to the factory default settings (for about 10 seconds). WPS/Reset Button ON/OFF Button Press to turn the device connected to the DSP-W215 ON or OFF. The Smart Plug is successfully connected to your network.
Installation 1 Download the free mydlink Home app from the App Store (iOS) or Google Play (Android). 2 First install the mydlink Home app on your mobile device. Then simply tap on the icon to launch the app. 3 Log into your mydlink account. If you don’t have one, sign up for a free mydlink account by clicking on the Sign Up! link. Tap Add a new device. Then follow the on-screen instructions. The wizard will guide you through the configuration process for your Smart Plug device.
FAQs 1. How do I reset the DSP-W215? When you reset your DSP-W215, it will change your settings back to the factory default settings. To reset the device, locate the WPS/Reset button on the side of the device. With the device plugged in, press and hold the WPS/reset button until the status LED turns red (for about 10 seconds). WPS/Reset 2. Why isn’t the Power LED turning on when I plug in my Smart Plug? If the Power LED is not turning on: a. Press the ON/OFF button on the front of the Smart Plug. b.
GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.
Technical Support This guide is only for the first time configuration. Refer to the user manual to learn more, or you can visit http://support.dlink.com. Also feel free to contact us through our website. USA http://support.dlink.com Canada http://support.dlink.ca Version 1.2 June 20, 2014 ©2014 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners.
