Table of Contents Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.dlink.com website for the most current information.
Table of Contents Table of Contents Product Overview.......................................................................1 Package Contents.......................................................................... 1 System Requirements.................................................................. 1 Introduction.................................................................................... 2 Features.............................................................................................
Section 1 - Product Overview Product Overview Package Contents • DUB-E100 USB 2.0 Fast Ethernet Adapter • CD-ROM with Drivers and Manual • Quick Installation Guide If any of the above items are missing or damaged, please contact your reseller. System Requirements Computer with the following: • Computer with Microsoft Windows® 7, Vista®, XP (Service Pack 2), or 2000 (Service Pack 4); Mac OS® 10.4 and above, Linux 2.
Section 1 - Product Overview Introduction The DUB-E100 is a high-speed USB 2.0 Fast Ethernet adapter for Windows/Mac/Linux desktop and notebook PCs. This adapter is designed to simply plug into an available USB port on your computer to connect you to a Fast Ethernet network without using a PCI or CardBus slot to add LAN connectivity. Its Plug-and-Play design makes installation and use straight forward.
Section 1 - Product Overview Hardware Overview 1 4 2 3 1 Link LED 2 Ethernet Port 3 Tx/Rx LED 4 USB Connector D-Link DUB-E100 User Manual Solid green light indicates when the DUB-E100 has a good connection to your Ethernet device. Plug an Ethernet cable from a switch or router into this port. Flashes green when data is transmitted or received at 100Mbps. When data is transmitted or received at 10Mbps, the LED flashes amber. Plug this connector into a USB port on your PC.
Section 2 - Installation Software Installation Insert the DUB-E100 CD into your computer’s DVD or CD drive, then proceed to the appropriate installation section on the following pages for your operating system. Windows® 7/Vista®/XP 1. After you insert the CD into the CD drive, the DUB-E100 menu screen will appear. Click Install to begin the DUB-E100 driver installation. The InstallShield Wizard will appear and run automatically.
Section 2 - Installation 2. When the Installation is complete, plug the DUB-E100 ‘s USB cable into an available USB port on your PC. Windows will detect the new hardware and prompt you for the drivers. For Windows® 7 and Vista® The driver software installation will start automatically. For Windows® XP The Found New Hardware Wizard box will appear. Select Yes, this time only and click Next to continue.
Section 2 - Installation Select the option to install the software automatically and click Next to continue. The driver software installation will then start automatically.
Section 2 - Installation 3. When the Windows driver installation is complete, attach an Ethernet cable to the Ethernet port on the DUB-E100. 4. Attach the other end of the Ethernet cable to your network switch or router. 5. When the installation of the DUB-E100 is complete, the LINK LED should be solid green indicating a good physical connection between the DUB-E100 and the network. The Tx/Rx LED blinks when data is being transmitted or received.
Section 2 - Installation Mac OS® X The following screenshots were taken from Mac OS® 10.5, but the steps are similar in other versions of OS® X. Your operating system must be version 10.4 or above. 1. Please insert the DUB-E100 CD into your computer’s DVD or CD drive, then go to the DUB-E100 folder and navigate to \Drivers\MAC. Then, double click on DUB-E100.dmg. 2. Go to the DISK IMAGE under DEVICES and double-click DUB-E100_v3.5.0.
Section 2 - Installation 3. Click Continue. 4. Click Install to perform a standard installation. If you wish to change the drive where the installation will take place, click Change Install Location.
Section 2 - Installation 5. If you clicked Change Install Location, you will see the Destination Select screen. Select a Destination Disk, then click Continue. 6. Enter the name and password of a user with administrative rights and the click OK. 7. Click Continue Installation. The computer will then restart itself after the installation is complete.
Section 2 - Installation 8. Once you have completed the driver installation, plug the DUB E100’s USB cable into an available USB port on your computer. 9. Attach an Ethernet cable to the Ethernet port on the DUB-E100. 10. Attach the other end of the Ethernet cable to your network switch or router. 11. When the installation of the DUB-E100 is complete, the LINK LED should be solid green, indicating a good physical connection between the DUB-E100 and the network.
Section 2 - Installation Linux 2.6.14 This driver is designed for Kernel 2.6.14.x or above. To compile the provided Linux driver, you need the Linux 2.6 Kernel source. Also, please make sure the kernel is built with “Support for Host-side, EHCI, OHCI, and UHCI” option. Please follow these steps. 1. Insert the CD into the CD drive of your computer and go to the Drivers\Linux\ directory. 2. Copy the LINUX2.6.14_REV101 folder to your temporary directory. 3. Go to the LINUX2.6.
Section 3 - Troubleshooting Troubleshooting Do I need to use a crossover cable or straight-through cable? With most switches/routers, the Ethernet ports are Auto MDI-II/MDI-X. This means the port will auto-sense the cable type. Auto MDI-II/MDI-X ports may react differently if the Ethernet cable is not properly pinned. If you make your own cables, it is very important that they follow the industry standard pin-out (568A and 568B).
Section 3 - Troubleshooting Linux 2.6.x To verify if the DUB-E100 driver is properly installed: • Load the DUB-E100 module by the following command: [root@localhost linux2.6.14_rev101]# modprobe asix • List the loaded modules with the specified pattern “asix”: [root@localhost linux2.6.
Appendix A - Technical Specifications Technical Specifications Firmware Specifications OS • Microsoft® Windows® 7/Vista®/XP • Mac OS® X 10.4/10.5 • Linux Hardware Specifications PACKAGE CONTENTS • DUB-E100 USB 2.0 Fast Ethernet Adapter • Quick Installation Guide • CD-ROM with: - Drivers - Manual STANDARDS • USB Specification Version 2.0 • USB Specification Version 1.1 • USB Specification Version 1.0 • OHCI (Open Host Controller Interface) • EHCI (Enhanced Host Controller Interface) • IEEE 802.
Appendix B - Warranty Warranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and • Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Appendix B - Warranty Limited Software Warranty: D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation.
Appendix B - Warranty • After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package o ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories.
Appendix B - Warranty While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
Appendix B - Warranty Copyright Statement: No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2012 by D-Link Corporation/D-Link Systems, Inc.
Appendix B - Warranty IMPORTANT NOTICE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Appendix C - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 3.
