D-Link® DSM-320RD Wireless Media Player with DVD and Card Reader Manual v.1.
Contents Safety Information .................................................................................................................... 5 Introduction .............................................................................................................................. 8 Package Contents .................................................................................................................. 10 System Requirements ....................................................................
Organizing Photo Albums .............................................................................................. 57 Playing a Photo Slideshow ............................................................................................ 58 Controlling Photo Playback ........................................................................................... 58 Shuffle and Repeat .........................................................................................................
Wireless Installation Considerations .......................................................................... 109 Audio and Video Cables Guide .................................................................................... 110 Glossary ................................................................................................................................ 111 Networking ....................................................................................................................
Safety Information For optimum performance, please read the following information carefully. Safety Precautions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert users to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety (continued) CAUTION! • DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. • DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. • DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.
Safety (continued) Radio and TV Interference: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Introduction D-Link® introduces the latest addition to its multimedia family of products: the D-Link® MediaLoungeTM DSM-320RD Wireless Media Player with DVD and Card Reader. The DSM-320RD integrates home computer systems and home entertainment centers. Movies, music, and photos can be enjoyed from the comfort of the living room. The DSM-320RD connects easily to a wired or wireless network. The DSM-320RD features 802.
Introduction (continued) Vorbis, and AIFF files from your computer and enjoy them on your home stereo system. Watch stored videos in MPEG1/2/4, AVI, or Xvid format on your television. Enjoy slideshows of your favorite photos in JPEG, JPEG2000, TIFF, GIF, BMP or PNG formats. Better yet, it’s easy to access the files through the television interface using the remote control included with the DSM-320RD. Experience digital media like never before with the MediaLounge DSM-320RD Wireless Media Player.
Package Contents D-Link DSM-320RD Wireless Media Player with DVD and Card Reader Printed Quick Installation Guide CD-ROM with Manual (Contains D-Link Media Server Software, Quick Installation Guide, and Manual) 2dBi Wireless Antenna Ethernet (CAT5-UTP/Straight-Through) Cable Standard Composite RCA Audio/Video Cable S-Video Cable Remote Control with Batteries System Requirements Television with composite, S-Video, or component video inputs and an audio device with composit
Features & Benefits Stream media content from a PC or D-Link Central Home Drive to your entertainment center. Listen to digital music on your stereo system. View digital photos, slideshows, and videos on TV. Progressive Scan DVD player provides superior picture quality. Built-in 5-in-1 card reader provides instant access to music, photos, and Videos on Memory Cards. Support for Windows® Connect Now (WCN) for easy wireless setup. Easily connect to your wireless network using 802.
Hardware Overview Front Panel LAN LED - Blinks to indicate activity on the network. Wireless LED - Blinks to indicate wireless activity.
Getting Started To begin using the DSM-320RD Wireless Media Player, you will need: An existing home network (including a wireless 802.11b or 802.11g router or a router/hub with an available Ethernet port). The DSM-320RD Media Server software installed on the PC you will be sharing files from. This computer will collect music, photo and video content from local sources (a digital camera for example) and from the Internet (downloaded MP3 music, digital photos, or video files).
Using the Remote Control (continued) 1. Power 1 2. Eject DVD 3. Numeric Keys 4. “.” (period or dot) 5. Clear 3 6. Setup 7. Display 8. Return 4 9. Mute 6 8 10. Enter 11. Navigation Buttons 10 12. Page Up & Down 13. Volume + & 12 14. Home 15. Color-Coded Shortcut Keys 16. Step 17. Slow Motion 18. Play/Pause 15 19. Fast Forward 20. Previous 21. Rewind 17 22. Next 19 23. Stop 21 23 24. Zoom 25 25. Rotate 27 26. Angle 28 27. Search 30 31 28. Menu 33 29. Subtitle 35 30. Title 37 31. Repeat 32. Language 33.
Using the Remote Control (continued) Power Turn the DSM-320RD ON or OFF. Eject Open and close the DVD tray. Number Keys Enter numbers where needed, or use the onscreen keyboard to input text. Number keys 1-9 can be defined as Music presets. To define a preset, highlight the desired music selection onscreen, and press down on the desired number (from 1-9) on the remote control until the preset icon appears. Press the assigned number to play the selection. “.” (a period, also known as a dot.
Using the Remote Control (continued) Search Enter the Search function to find your media file on your PC or search video timeframe. Zoom Zoom in/out on the photo or video. Menu Access the current menu. Title Displays the DVD’s title. Subtitle Displays DVD subtitles. Angle If the DVD has multiple angle support, you can toggle between different camera angles. Repeat Repeat the current Music, Video, Photo Slideshow, DVD, CD, or VCD selection.
Installing the D-Link® Media Server Software To share audio, video, and photo files from your computer, it is necessary to install the D-Link® Media Server software on the PC that contains the files you want to share. The D-Link® Media Server software allows you to point to the folders on your PC’s hard drive that contain the audio, video, and photo files you want to share. The D-Link® Media Server software then streams the information to your DSM-320RD via your wired/wireless network connection.
Installing the D-Link® Media Server Software (continued) Click on D-Link Media Server Installer If the screen on the right does not appear, go to My Computer and double-click on the CD-ROM drive. The screen at right will appear. The D-Link Media Server Setup Wizard will appear.
Installing the D-Link® Media Server Software (continued) The D-Link license agreement screen appears. Click Next Choose a Destination location or accept the default location. This is where the D-Link Media Server software will be copied to on your system. Click Next Choose a Start Menu folder or accept the default location.
Installing the D-Link® Media Server Software (continued) Select the icons you want created. Select Create a desktop icon to access the program from your desktop. Select Create a Quick Launch icon to access the program from your taskbar. Select Create a startup icon so the program launches on startup. Click Install The necessary software will be copied to the specified locations on your computer.
Choosing Music, Photo, and Video Files to Share The D-Link® Media Server software enables you to share the files from your computer with the DSM-320RD. By sharing the files, there is no need to copy the files from your computer to the unit before they can play. The data is streamed directly from the files on your computer over the network to your DSM-320RD. Follow the steps on the following pages to choose the music, photo, and video files to share.
Choosing Music, Photo, and Video Files to Share (continued) The File Types tab is where you select the types of audio, video, and photo files that you want to share. The Shared Folder tab is where you select the folders that contain your audio, video, and photo files.
Choosing Music, Photo, and Video Files to Share (continued) Select the folder containing the files you wish to share. Click OK Repeat the steps until all of the folders containing audio, video, and photos you want to share have been added.
Choosing Music, Photo, and Video Files to Share (continued) The Media Files tab will show all your audio, video, and photo files as well as display important file information.
Using the D-Link® Media Server Software Accessing the Media on your PCs Before you can access the media from a PC, you must install the D-Link® Media Server software (See Page 17). Simply install the included software on each PC where music, video, or digital photos are stored. If you selected the option to Create a startup icon during the Media Server software installation (See Page 20), the D-Link® Media Server software will automatically start whenever you power on your PC.
Using the D-Link Media Server Software (continued) Sharing Media Content in Folders The D-Link Media Server will share media content from selected directory folders. All subfolders within a shared folder are shared as well. The Shared Folders tab displays the list of shared folders. Add folders where your music, photos, and videos are stored, or remove folders you no longer wish to share. Depending on the number of files in your folders, there may be a slight delay before the path appears in the window.
Using the D-Link Media Server Software (continued) Click Scheduler if you want to setup an automatic refresh interval. Click Time and select a time period. This is how often the server will refresh the folder contents. Naming the Media Server The Media Server name is entered here. This is the server name that is displayed when searching for available media servers in the DSM-320RD interface.
Using the D-Link Media Server Software (continued) Stopping the D-Link Media Server To stop the D-Link® Media Server (and stop sharing your photos, video and music on your PC), right-click on the server icon and select Exit from the server menu. Note: The photo, video, and music files stored on your computer will be available to your DSM-320RD only if the D-Link® Media Server is running.
Using Windows® Media Connect Software Windows XP users with Service Pack 2 can utilize the Windows® Media Connect software in addition to or instead of using the D-Link Media Server software. The Windows® Media Connect software allows the DSM-320RD to playback DRM (Digital Rights Management) protected files. The Windows® Media Connect software is available via Windows Update if you are using Windows XP with Service Pack 2.
Using Windows® Media Connect Software (continued) The Sharing tab is where you configure the folders that you want to share with your DSM-320RD.
Using Windows® Media Connect Software (continued) Click Make this content available to all devices Click OK The Shared Folders will appear in the window. Repeat the steps until you’ve shared all of the folders that you want the DSM-320RD to access. Click Automatically start folder sharing when Windows starts The Settings tab allows you to automatically start folder sharing when Windows starts. You can also Stop/ Start sharing.
Using Windows® Media Connect Software (continued) The DSM-320RD supports additional file types that are not supported by the Windows® Media Connect software. The file types shown below are supported by both Windows® Media Connect and the DSM-320RD. File Type File Extension Details Windows Media Audio .wma Does not support WMA lossless, WMA Pro WAV .wav MP3 .mp3 Up to 192kbps JPEG .jpg Does not support CMYK or YCCK GIF .gif Does not support animated gifs BMP .bmp non-compressed TIFF .
Connecting the DSM-320RD All audio, video, and networking connections are located on the rear panel of the DSM-320RD. Video Connections Select one of three ways to connect video to your DSM-320RD: • Composite Video Connector Plug the supplied yellow video cable into the DSM-320RD and the matching opposite end of the cable to your television input. • S-Video Connector Plug the supplied S-Video cable into the S-Video connector and the opposite end into the S-Video connector on your television.
Connecting the DSM-320RD (continued) Audio Connections The AUDIO OUT button on the remote control toggles between the composite audio output and the digital audio output (optical/coaxial). • Composite Audio Plug the supplied red and white connectors into the color-coded matching jacks on the DSM-320RD. Plug the opposite ends to the matching jacks on your television or audio/video system.
Connecting the DSM-320RD (continued) Network Connections Select one of two ways to connect a network to your DSM-320RD: • RJ-45 Ethernet Connector Connect the supplied Ethernet cable to the network cable connector, and attach the other end to the network. • Wireless Antenna Attach the supplied antenna by threading it onto the antenna connector. Be sure the antenna is secure and in an upright position. Note: You may have an Ethernet cable plugged into the unit and have the wireless antenna connected.
Network Layout Below is a diagram displaying what your network might look like once all of the connections have been made to the D-Link® DSM-320RD Wireless Media Player.
Using the On-Screen Keyboard Whenever the cursor is in a text field and you need to enter text, press ENTER on the remote control and the on-screen keyboard will appear. The keyboard is used for a variety of functions such as naming your DSM-320RD and performing searches for music, photos or video. To use the keyboard, highlight a character with the arrow buttons on the remote control and press the ENTER button. Text can also be entered by using numbers 2-9 on the remote, just as you would on a cell phone.
The DSM-320RD Setup Wizard The DSM-320RD Setup Wizard is navigated using the directional arrows and the ENTER button on the remote control. To toggle between the configuration options, use the up and down arrows on the remote control. To toggle between the Back, Next, and Rescan buttons, use the left and right arrows on the remote control. Press ENTER to select a field or confirm a selection. Welcome Screen During the initial startup, the DSM-320RD displays the Setup Wizard Welcome screen.
The DSM-320RD Setup Wizard (continued) Select Your Network Connection The connection type defaults to Wireless. Wireless If using a wireless network, press the down arrow on the remote control to navigate to the Next button. Once the Next button is highlighted, press ENTER on the remote control to proceed to the next screen. Wired To select Wired, press the ENTER button on the remote control while the Connection is highlighted. Press the up arrow on the remote control to choose Wired.
The DSM-320RD Setup Wizard (continued) Current Wireless Settings To use Windows ® Connect Now (WCN), please skip to page 43. Your current wireless settings are displayed based on the SSID you selected in the previous step. If you chose the enter the SSID manually, then the default settings are entered. SSID The SSID name selected on the previous screen appears here. You can change the SSID you selected or enter one manually by pressing the ENTER button on the remote control with this field highlighted.
The DSM-320RD Setup Wizard (continued) Key (continued) Press the ENTER button on the remote control with this field highlighted to enter a key. The on-screen keyboard will be displayed and you can enter the key. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange – alphanumeric characters) format.
The DSM-320RD Setup Wizard (continued) Select a Media Server Select a Media Server from the list by pressing the ENTER button on the remote control with the Media Server list highlighted. Use the up arrow and down arrow to navigate through the list of servers. Press ENTER again to select a Media Server. Use the down arrow to navigate to the Next button. Rescan will refresh the list of available Media Servers. Use the left and right arrows to navigate between the Next and Rescan button.
Windows Connect Now Configuration If you already have wireless settings configured on your PC, instead of using the setup wizard, you can use Windows® Connect Now (WCN) to configure the wireless settings on your DSM-320RD. Note: WCN is only available on PCs running WindowsXP with Service Pack 2 installed. In the menu bar, go to Start > All Programs > Accessories > Communications and click Wireless Network Setup Wizard. Your system will display the Setup Wizard Welcome screen. Click Next to continue.
Windows Connect Now Configuration (continued) Select to add a new device to your existing wireless network and click Next to continue. The wizard provides two methods for setting up a wireless network. Using a USB flash drive is recommended. Select to use a USB flash drive to save your wireless network settings and click Next to continue.
Windows Connect Now Configuration (continued) Plug your flash drive into a USB port on this computer. The drive letter will appear in the pull down menu. You can choose to use this drive or select another drive. Click Next to save your wireless settings to the USB flash drive. This may take a few seconds. This screen will appear when the wireless settings have been saved to the USB flash drive.
Windows Connect Now Configuration (continued) The following screen will appear, prompting you to apply your wireless settings. Click OK to continue. The following screen confirms that your wireless settings have been applied. Click OK. Next, remove the USB Flash Drive from the DSM-320RD and insert it back into the USB port on your PC. Click Next to continue.
Windows Connect Now Configuration (continued) Wireless configuration using WCN is now complete. The setup wizard will display the devices that have been setup with your wireless network. Click Finish.
DSM-320RD Menu Menu Basics The DSM-320RD uses an on-screen menu interface. As you move through the menus, you will use the selection arrows on the remote control to move up, down, right and left. The highlight bar moves from item to item as you press the selection arrows. In some instances you will need to press ENTER on the remote control to access the pulldown menu within an item. You will then see an arrow within the highlighted bar.
Music Music Quality Your music listening experience on the media player depends upon the quality of your digital music files on your PC. Avoid quality settings below 48kbps as they are unsupported. For CD quality music, rip your MP3s at 128kbps or higher, with a sample rate of 44.1kHz. Supported Music Formats The following music file formats are supported: MP3 (up to 192 kbps) MPEG-1, Layer 3 Audio file -The standard Internet music file format. This is the most commonly used audio format.
Music (continued) Organizing Music Files Music files are located on your PC and can be contained in one directory folder, or organized in several subfolders. The DSM-320RD automatically organizes your music files by genres, artists, albums, and tracks. This information is obtained from the ID3 tags in each of your music files. The ID3 tag is created for you when you rip (copy) your music from your CD.
Music (continued) Playing a Track Once you enter the music menu, there are several ways that you can view tracks. You can view all tracks, playlists, tracks by genre, artist, album, or folder name. Use the selection arrows to navigate to the track you wish to play. Once you have located the appropriate track, highlight it and press ENTER or PLAY on the remote control. The track will begin playing on your stereo or television speakers. To play a track starting from the main home screen: 1.
Music (continued) Creating a Preset To create a preset, follow the steps below: 1. Select the MUSIC category from the Home page or click on the MUSIC button on the remote control. 2. Select a viewing category. Use the down arrow and up arrow on the remote control to navigate to a viewing category (by All Tracks, Playlists, Genres, Artists, Albums, or Folders). Select the option by clicking ENTER or the right arrow on the remote control. 3. Select a Track.
Music (continued) Browsing for Music There are many ways to browse for a music track. For example, let’s use the following music file located in the following shared location: c:\Documents and Settings\Rob\My Documents\My Music\Violator\Halo.mp3 Halo.mp3 Artist: Depeche Mode Album: Violator Genre: Alternative To browse for this track in the track list: 1. Select All Tracks 2. Highlight Halo To browse by artist: 1. Select Artists 2. Select Depeche Mode 3. Select Violator 4.
Music (continued) Creating Music Playlists Use your favorite music software on your PC to create music playlists. A playlist allows you to specify exactly what tracks to play and in what order to play them. For example, create a “favorites” playlist and just listen to your favorite tracks. Save the playlist in the industry standard .m3u playlist format. The DSM-320RD will play tracks from playlists you create on your computer.
Music (continued) Viewing Photos while Music is Playing Your DSM-320RD is capable of displaying photos and playing background or preset music simultaneously. Background Music: You can start background music by playing a song in MUSIC mode. Go to PHOTO mode and start your photo slideshow. Preset Music: To play presets during your slideshow, simply press a number on the remote control that corresponds with an existing Preset.
Photo Supported Photo Formats The following photo file formats are supported: BMP (non-compressed) Windows bitmap file. Widely used in Microsoft Windows for pictures and backgrounds. JPEG (grayscale, RGB, YCbCy) (Does not support CMYK, YCCK.) The JPEG format is the Internet and digital photo format standard used by most digital cameras. GIF (Animated GIF’s are not supported) Older format still widely available on the internet for photos, web pages, and clip art.
Photo (continued) Organizing Photo Albums Unlike music files, photos contain little information about their content. Therefore, photos are organized by their filename and by the folder they are in. Many digital cameras will organize your photos into folders when you connect and unload them to your PC. Each time you dock or connect, a new folder is created using the current date and time, and all photos are copied into that folder. To simplify browsing on your DSM-320RD, you can create folders on your PC.
Photo (continued) Playing a Photo Slideshow To start playing a photo slideshow, highlight a folder and press the PLAY button. The first photo will be displayed and then followed by the next photo in the folder. All photos in the folder will be displayed. Controlling Photo Playback Controlling photo playback is very similar to controlling a CD player. Once you have started a photo slideshow, use the remote to PLAY, PAUSE, or STOP the show.
Photo (continued) Viewing Photo Information To view information about a photo, highlight the photo and press the DISPLAY button.
Photo (continued) Photo Viewing Effects When viewing a photo you can change the on-screen appearance by applying rotate, pan, and zoom effects. These on-screen effects are only for enhancing the on-screen view and are not saved to the actual file. To access the photo viewing effects, press the MENU button on the remote control while viewing the photo that you want to manipulate.
Video Supported Video Formats The following video file formats are supported: MPEG-1 (up to 8Mbps) MPEG-2 (up to 8Mbps) MPEG-4 (ASP - Advanced Simple Profile) AVI (MPEG4 layer only, does not support uncompressed AVI) XVID (with MP3 and PCM) Viewing a Video Once you enter the Video menu, you can view your list of videos. Use the selection arrows to navigate to the video folder you wish to view. Highlight and press ENTER to view the video folder.
Video (continued) Using the Remote Control with Videos ENTER - Click ENTER to play your highlighted video. PLAY/PAUSE - To pause the video and to resume playing the video. + (VOLUME) - To increase the volume. - (VOLUME) - To decrease the volume. MUTE - To silence the audio portion of the video. FF - To fast forward through the video. DISPLAY - To view the track time; the resolution and the bit rate. REPEAT - To repeat the video after viewing it. Below are the on-screen indicators when a button is pressed.
Search Click the SEARCH button on the remote control and the screen below will appear. This screen allows you to search for music tracks, videos, or photos. Use the up and down arrows on the remote control to navigate through the options. Press ENTER on the remote control to make a selection. Use the down arrow to navigate to the next field. Media Type: You can select All types of media or specify music, photo, or video. Search Type: There are two options available under the Search Type.
DVD Viewing a DVD Once you enter the DVD menu, if there is a disc in the DVD tray and the Auto Play setting is enabled (see Setup-DVD on page 92), the DVD will automatically play. Otherwise, press the Play button to launch the DVD menu. Use the selection arrows and ENTER button to navigate the DVD menu. Using the Remote Control with DVDs EJECT - The Eject button opens and closes the DVD tray located on the front panel of the DSM-320RD.
DVD (continued) Next - To jump forward to the next chapter. Prev - To jump back to the previous chapter. ZOOM - To zoom in/out on the video. Title - Displays the DVD’s title. Subtitle - Displays DVD subtitles. Angle - If the DVD has multiple angle support, you can toggle between different camera angles. REPEAT - To repeat the video after viewing it. A-B - Select a start point (A) and an end point (AB) of video to replay. Below are the on-screen indicators when a button is pressed.
DVD (continued) DVD Player Considerations CD-R/CD-RW discs recorded by CDDA method can be played. Some CD-R/CD-RW discs may be incompatible due to laser pickup and disc design. DVD-R discs recorded by DVD-Video method can be played. Some DVD-R discs may be incompatible due to laser pick up and disc design. This DVD player may not support some MP3 recordings due to differences in recording formats condition.
Memory Card Viewing a Memory Card In the Memory Card menu, the DSM-320RD will display if there are any memory cards plugged in to the device. The two memory card slots will display “Empty” if there are no available cards. When you plug in a memory card, the memory card type will display in Slot 1 or Slot 2. Use the selection arrows and press ENTER to select a memory card for viewing.
Supported File Types The DVD player and Card Reader support the following file types: Music: .mp1 .mpa .mp2 .mp3 .wav .aif .aiff .wma .lpcm .ogg Photos: .jpg .jpeg .tif .tiff Video: .mpg .mpeg .m1v .dat .m2v .vob .avi .
Online Media Currently the DSM-320RD supports Radio@AOL1, Rhapsody™ 2, and Live365™ online services. Content downloaded from Napster™ 3 can also be used with your DSM-320RD. New services will be added in the future and made available via firmware upgrades. If your DSM-320RD is configured to perform firmware upgrades automatically (see Version on page 96 for details), then you will see new options as soon as they become available.
Online Media (continued) After selecting AOL® Services (as shown on the previous page), you will be given the option to sign in as an AOL® Member, or, if you are not a member, you can enjoy a Free Trial. AOL® members will sign in as follows: For AOL® Members: Click AOL Members - Sign In. Click OK. Enter your AOL screen name and password. As an AOL member, you are now ready to use Radio@AOL or Radio@AOL Presets! Click Radio@AOL to enter the radio station selection screen.
Online Media (continued) For AOL® Members (continued) Radio@AOL Information about the current selection will be displayed here. Use the up and down arrow buttons on your remote to scroll up and down through the genre list. If a station is highlighted, you will need to press the left arrow on your remote control to navigate to the genre list. When you’ve found a genre you like, you can press ENTER or use the right arrow button on your remote control to navigate to the station list.
Online Media (continued) For AOL® Members (continued) Radio@AOL Presets Click Radio@AOL Presets. Switch Screen Name Preset Radio stations are available here. Use the arrow buttons on your remote control to highlight the station of your choice and press ENTER to select it. AOL® Presets can only be accessed via this screen. AOL® has a list of presets already programmed or you can define your own selections as shown on the previous page. Note: Only Radio@AOL subscribers can select their own presets.
Online Media (continued) AOL® Services for Non-members Click Setup to begin your free trial of Radio@AOL using your DSM-320RD. Click Free Trial. Click OK. You are now ready to begin your free trial. Please see the previous pages for an explanation of your listening options. Non-members have access to Radio@AOL Presets, and can select from five preset stations. (AOL members can configure their own preset stations.
Online Media (continued) Live365™ Live365™ is an Internet radio service that provides unlimited on-demand access to thousands of radio stations. The audio is streamed directly over the Internet. Live365™ allows you to select your own preset stations and provides custom station recommendations. Select Online Media from the Home screen or click the ONLINE MEDIA button on your remote control. Press the down arrow on the remote control to select Live365™ and press ENTER to select it.
Online Media (continued) Live365™ (continued) Editor’s Station Picks: Lists recommended stations based on your preset stations. Press the MENU button to add a station to your preset list. Genres: Lists stations according to genre. Press the MENU button to add a station to your preset list. Setups: Click to access setup features such as Login and Learn about Sign Up information. Search: Allows you to enter a song or artist to search for Live365 stations that play that music.
Online Media (continued) Napster™ Napster ™ is a legal music service that gives subscribers on-demand access to over 700,000 music tracks. Napster™ subscribers can listen to and collect full-length, high-quality tracks online and offline. Subscribers can also collect as many tracks as desired on the hard drives of up to 3 PC computers to listen offline and use with the DSM-320RD. These tracks can be enjoyed for the duration of your Napster™ subscription.
Online Media (continued) Napster™ (continued) You can search by artist, track names, album names, and even search other member’s collections. Select a track that you want to download. Click the download button to download the file to your computer. The library window will display the download status. By default, downloaded music is stored in the My Music folder on your hard drive.
Online Media (continued) Napster™ (continued) Important! You need to use the Windows Media Connect® software to play the protected files that you download from Napster™. Please see page 29 for details. Be sure to select the Windows® Media Connect server as the default server in the DSM-320RD System Setup if you want to access content downloaded from Napster™. To do so, press the SETUP button on the remote control. Navigate to System by using the down arrow and then press ENTER.
Online Media (continued) Rhapsody™ Rhapsody™ is a subscription music service that provides unlimited on-demand access to over 725,000 music tracks. The CD quality audio is streamed directly over the Internet. Rhapsody™ also offers access to Internet radio stations and allows you to create your own custom stations. Select Online Media from the Home screen or click the ONLINE MEDIA button on your remote control. Press the down arrow on the remote control to select Rhapsody™ and press ENTER to select it.
Online Media (continued) For Users New to Rhapsody™ The D-Link DSM-320RD CD-ROM contains a link to the latest version of the Rhapsody™ software. Click Online Media Services Note: You can also get to the link by visiting our website at http://support.dlink.
Online Media (continued) For Users New to Rhapsody™ (continued) The installation software will begin downloading to your computer. Click Next Please read the Terms of Use. If you do not agree to these terms, the installation process can not occur.
Online Media (continued) For Users New to Rhapsody™ (continued) Select a destination folder for the software installation or use the default location. Click Next If you are connecting through a proxy server you can enter the settings here. If you are unsure, leave it as is.
Online Media (continued) For Users New to Rhapsody™ (continued) By default the options are configured to create shortcuts on your Desktop and on the Quick Launch toolbar. Click Finish Click Register Now! Fill in the blank fields to begin the registration process.
Online Media (continued) For Users New to Rhapsody™ (continued) Complete the registration information on this page.
Online Media (continued) For Users New to Rhapsody™ (continued) Enter DLINK-MUSIC as the coupon code and click the Start Here button. Select the service plan that you would like to sign up for. Now that you’ve installed the Rhapsody™ software and created an account, you need to configure the software for use with the DSM-320RD. Please follow the steps on the following page to configure the software.
Online Media (continued) Configuring Rhapsody™ for use with the DSM-320RD To use Rhapsody™ with your DSM-320RD you need to enable the UPnP Server within the User Settings. To do this, launch the Rhapsody™ application and follow the steps below.
Online Media (continued) Configuring Rhapsody™ for use with the DSM-320RD (continued) Only songs (albums or individual tracks) and radio stations that have been added to your library are available for streaming to your DSM-320RD. The library displays music and radio stations that have been added to your library. The library can be sorted by artist, tracks, albums, and radio stations. If you’ve created playlists, you can sort these as well.
Setup If you want to change the configuration of your setup you can press the SETUP button on the remote control. For an explanation of the terminology used in the Setup functions, please see the Glossary. Press SETUP on your remote control to access the setup features. Using the up arrow and down arrow buttons on your remote control, scroll down the list to highlight your selection then press ENTER or the right arrow to select your choice.
Setup (continued) Configuration: Select Static or DHCP by pressing the up arrow or down arrow. When the desired option is highlighted, press ENTER on the remote. If Static is selected, you will need to input the IP, Netmask, Gateway, and DNS. A DHCP-enabled router automatically assigns IP addresses to devices on your network. If you have a DHCP-enabled router, select DHCP.
Setup (continued) Encryption: WEP (Wired Equivalent Privacy) & WPA (WiFi Protected Access; a wireless standard designed to improve upon the security features of WEP), are two encryption technologies used by wireless devices. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption.
Setup (continued) System Device Name: You can change the name of your DSM-320RD here. To do so, press ENTER on the remote control with the Device Name field highlighted. The on-screen keyboard will appear. Default Server: The default server is listed here. This field is not editable. To change the default server, you must select a server by going to View All Servers.
Setup (continued) DVD Audio Language: To change the audio language, press ENTER on the remote control with the Audio Language field highlighted. Use the up or down arrow to make your selection and press ENTER. Subtitle: To change the subtitle language, press ENTER on the remote control with the Subtitle field highlighted. use the up or down arrow to make your selection and press Enter. Angle: Enabling the Angle option allows you to toggle between multiple camera angles if it is supported on your DVD.
Setup (continued) General The General option contains a submenu of four options: Audio/Video Aspect ratio: The aspect ratio can be adjusted to match the capture settings of your video clips. Video Output: You can select the video output from this screen or by pressing the VIDEO OUT button on the remote control from any screen. The Composite setting should be selected for composite or S-Video connections. If component connectors are used but not selected, the screen will have a blue tint.
Setup (continued) Additional Settings Screen Saver Delay: Select the amount of idle time before the screen saver appears. Choose a time between 1-30 minutes. Use the up and down arrows on your remote control to navigate through the list. Press the ENTER button on your remote control to make a selection. Photo Display: Choose to have photos displayed as a list or as thumbnails. Thumbnails are small previews of the image but may take longer to appear.
Setup (continued) Memory Card Auto Playback: Enabling the Auto Playback function will automatically play the slideshow of files when you enter the Memory Card menu. Adjust Video Composite (RCA and S-Video): Selecting this option will allow you to adjust the Contrast, Brightness, and Hue of an RCA and/or SVideo connection to your monitor. Component (YPbPr): Selecting this option will allow you to adjust the Contrast, Brightness, and Hue of a Component connection to your monitor.
Setup (continued) Version Automatically check for firmware update: Firmware updates are system software updates that correct known issues and add new features to your DSM-320RD. If Yes is selected, your DSM-320RD will check the Internet periodically to locate available firmware updates. If a firmware update is located, you will be prompted to update. Check for Updates: Press ENTER on the remote control when this option is highlighted to check for firmware updates immediately.
Frequently Asked Questions What kind of files are supported by the DSM-320RD? Audio - MP3, WMA, WAV, AIFF, OGG Video - MPEG 1, 2, and 4, AVI, XVID Images - JPEG, PNG, BMP, GIF, TIFF, JPEG2000 What do I need to set up the D-Link’s DSM-320RD? You must have a Microsoft Windows-based home network in place, with at least one PC running Microsoft Windows XP/2000.
Frequently Asked Questions (continued) If I am running Windows® Media Connect, do I need to run the D-Link® Media Server software? No, you may run both applications but it is not necessary to run both at the same time. What about Copy Protection and DRM support? The most common method of copy protection is WMA DRM (Digital Rights Management). The DSM-320RD can play these types of files if you are using the Windows® Media Connect software.
Troubleshooting I cannot see the Setup Wizard when I turn on my DSM-320RD player for the first time. Make sure your TV is displaying the appropriate video source. You may need to use the AV Input, Source, Select, or TV/Video button on your TV or TV remote to change video sources. If you are having trouble changing the video source, refer to the instructions that came with your TV.
Troubleshooting (continued) I inserted the a DVD into the DSM-320RD, but there is no on screen display. A possible cause for this problem may be that the disc was inserted upside down or the disc may be dirty, scratched, or cracked. Please make sure the disc is inserted right side up, and the disc is clean, or else replace the disc. The DVD stops playing. The video skips or the sound is abnormal.
Troubleshooting (continued) I can’t find any of my music, photos, or video. Make sure your computer is powered on and that it has not entered standby mode. You may need to change your computer’s power settings if you want your content to be available all the time. Make sure the Media Server software is running on your computer. Look for the Media Server icon in your system tray. If necessary, start the Media Server software again.
Troubleshooting (continued) Some of my MP3 and WMA files don’t appear. The DSM-320RD supports the most common music file formats. However, there are almost an infinite variety of bit rates and sample rates. If a file does not appear on the receiver, it most likely uses an unsupported rate. The files may be copy protected. To share your files, turn copy protection off when you rip them (Note: WMA DRM files can be played by using Windows Media Connect Server software, see page 29 for details).
Troubleshooting (continued) Checking the bit and sample rates of a music file. To check the bit and sample rates of a music file: 1. Right-click on the file and select Properties. 2. Select the Summary tab and click the Advanced button. Scroll to the bottom of the list. The file to the right has a bit rate of 128 kbps and a sample rate of 44 kHz. In most cases, the sample rate does not matter unless you come across a file that will not play or appear on your player.
Troubleshooting (continued) I am unable to access Rhapsody™ content. Make sure Rhapsody™ is running on a computer connected to the network and check your network connections. Verify that the UPnP Server has been started in Rhapsody™. Within the Rhapsody™ application on your computer, go to Options, select User Settings, and go to the UPnP tab. If the Status is stopped, click on the Start button. Be sure to check Start UPnP server once logged in.
Troubleshooting (continued) When sharing files with the D-Link Media Server, my PC is very slow. If you are sharing gigabytes of content, especially videos, please make sure that you are not running any other software that requires high CPU usage. It takes a long time to share files with the D-Link Media Server. If you are sharing gigabytes of content with your media server software, it may take several minutes depending on the size of the content you are sharing.
Technical Specifications Network • TCP/IP (DHCP or Static IP Address) • 802.11g Wireless (Supports up to 54Mbps transfer rate) • 802.11b Wireless (Supports up to 11Mbps transfer rate) • Wired LAN: 10/100Mbps Media Streaming Protocol • HTTP Supported Audio Formats*: • MP3 (up to 192 kbps) • WAV & AIFF (AIFF files must be encoded in PCM format only.) • WMA (Does not support WMA lossless, WMA Pro) • MPEG 1 and MPEG 2 - Audio using the file extension .mp3 • OGG Vorbis - Audio using the .
Technical Specifications (continued) Antenna: • Type: 2.4GHz swivel-type monopole antenna • Frequency: 2.4GHz to 2.5GHz • Impedance: 50 ohms • Gain: 2dBi Dimensions • H x W x L: 1.5” x 11.25” x 16.75” • Weight: 5.5 pounds Security: • Hardware based WEP (Wired Equivalent Privacy) and WPA-PSK • Up to 128-bit encryption Configuration: • UPnP-AV 1.0 Enabled • INMPR Compliant PC System Requirements • Connection to 802.
Appendix Setting Microsoft Windows Power Options If you want access to your music and photos all the time, make sure to configure your PC’s power settings. Do not allow your computer to enter a standby power state, or you will have to “wake up” your PC to view music or photos on your DSM-320RD. However, your monitor can be in a low power state or turned off. To change your power settings on Windows XP: 1. Click on Start. 2. Select Control Panel. 3. Select Performance and Maintenance. 4.
Appendix (continued) Wireless Installation Considerations The D-Link® DSM-320RD can be integrated into a wireless network from virtually anywhere within its operating range. However, the range can be limited by the number of walls, thickness of walls, and location of the walls that the wireless signal must pass through. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Appendix (continued) Audio and Video Cables Guide 110
Glossary Networking 802.11b: A wireless networking standard that supports data encryption and up to 11Mbps bandwidth. 802.11g: A wireless networking standard that supports data encryption and up to 54Mbps bandwidth. Ad-Hoc: This wireless networking mode means that two PC’s are communicating in a Peer-to-Peer network, without a router or an access point. Bandwidth: A measure of the rate at which data can be sent and received through the network.
Glossary (continued) IP Address (Internet Protocol Address): An IP address consists of four groups of digits separated by periods. Each group of digits contain an 8-bit value as a number ranging from 0 to 255. Each computer must have it’s own unique IP address. The IP addresses on your network must be within the same range. For example, if one PC or device has an IP address of 192.168.0.2, the other devices should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4.
Glossary (continued) Music AIFF is short for Audio Interchange File Format, an audio format that was developed by Apple Computer and is the standard audio format for Macintosh computers. AIFF use a .AIF or .IEF extension. M3U is a playlist format and is the default playlist format of WinAMP and most other media player software. It allows multiple files to be queued in a program in a specific format. MP3 is the file extension for MPEG-1, audio layer 3.
Glossary (continued) Photo BMP: The standard bit-mapped graphics format used in the Windows environment. By convention, graphics files in the BMP format end with a .BMP extension. GIF: Pronounced jiff or giff and stands for graphics interchange format, it is a bit-mapped graphics file format. GIF supports color and various resolutions. It uses data compression, but it is limited to a 256-color palette. JPG: Short for Joint Photographic Experts Group, and pronounced jay-peg.
Glossary (continued) Video AVI: Short for Audio Video Interleave, the file format for Microsoft’s Video for Windows standard. See under Video for Windows. DivX: Is a video format that is MPEG-4 compliant and widely used on the Internet for encoding video files. MPEG: Short for Moving Picture Experts Group, and pronounced “empeg”. MPEG generally produces better-quality video than competing formats.
Warranty USA Only Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • D-Link or its authorized reseller or distributor and • Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO.
Warranty (continued) USA only • After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and will not ship back any accessories.
Warranty (continued) USA only Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc.
Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Contacting Technical Support Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone.