User manual

18D-Link DVX-2000MS User Manual
Section 2 - Installation
Hardware Installation
Connecting the DVX-2000MS Base Unit
Plug the power adapter into an AC outlet or power strip and plug the other end into the AC input on the back of the
DVX-2000MS Base Unit. The power LED will light up to indicate proper connection.
Connect one end of the Ethernet cable to the LAN Port on the back of the DVX-2000MS Base Unit and connect the
other end of the Ethernet cable to a Local Area Network via switch or hub. The LAN LED will light up to indicate proper
connection.
When you have connected the DVX-2000MS to your network, it should look like the diagram below: