User manual

35D-Link DVX-2000MS User Manual
Section 2 - Installation
Testing the DVG-3104MS Gateway Connection
Now that the DVG-3104MS Gateway is installed and the phones and phone service are configured, it’s time to test
inbound and outbound calls.
To test the phone system with an outbound call:
1. Using one of the phones you installed, dial 9, then the country code (1 for the United States), and then
an external phone number.
2. Make sure the external number rings and you are connected to a person outside of your office.
To test the phone system with an inbound call:
1. Using a mobile phone or an outside phone line, place an inbound call to your office phone.
2. When prompted, ask for the name of the user assigned to one of the phones you previously installed.
Note: If this step does not work, make sure all cables and cords are properly seated into their respective
ports and outlet.