User manual

DWA-192

ESKY

1. IF I’VE LOST MY CD WHAT CAN I DO?

The CD contains software drivers and manual which can be obtained from D-Link (see Technical

Support below). In most cases Windows will automatically install the correct drivers.

2. IF I’VE FORGOTTEN MY WIRELESS ENCRYPTION KEY?

The wireless encryption key is congured at the wireless access point, router or DSL modem router.

If you are unable to obtain your encryption key, the only solution would be to re-congure your access

point/router to use a new encryption key. Please contact your wireless access point/router/DSL modem

router manufacturer.

3. WHY CAN’T I GET A WIRELESS CONNECTION?

- Check that the USB cable is properly plugged into both the DWA-192 and your computer, or try

another USB port on your computer if available.

- The LED on the DWA-192 should be blinking blue, otherwise there could be a physical fault on the

USB port or the driver is not installed properly.

- Ensure that the wireless settings on the DWA-192 match the settings on your access point/router.

Please check and conrm your settings for:

Wireless Network Name (SSID)

Wireless Encryption Key

Wireless Security Method (E.g. WEP, WPA2)

To check whether a wireless connection has been made: in the Windows System Tray (bottom right),

red means no valid connections have been made. The LED on the DWA-192 should be solid blue.

- Check that your Internet is working ne on existing computers.

- Ensure that you have followed and completed the software installation process, otherwise, please re-

install the software. The LED on the DWA-192 should come on after software installation.

SETUp AND CONFIGUrATION prOBLEMS

ŘEŠENÍ prOBLÉMŮ

TECHNICKÁ PODPORA

dlink.com/support