User Manual

ManualsBrandsD-Link ManualsElectronicsAirPlus 2.4GHz Wireless Access Access Point

This product can be set up usingThis product can be set up using

This product can be set up using

any current web browser, i.e.,any current web browser, i.e.,

any current web browser, i.e.,

Internet Explorer 6 or NetscapeInternet Explorer 6 or Netscape

Internet Explorer 6 or Netscape

Navigator 6.2.3.Navigator 6.2.3.

Navigator 6.2.3.

DWL-1000AP+DWL-1000AP+

DWL-1000AP+

D-Link D-Link

D-Link

AirAir

Air

PremierPremier

Premier

TMTM

Wireless Access PointWireless Access Point

Wireless Access Point

5V 2.5A DC Power Adapter

specifications subject to change without notice. DWL-1000AP+.11122002

Before You BeginBefore You Begin

Before You Begin

Check Your Package ContentsCheck Your Package Contents

Check Your Package Contents

DWL-1000AP+ Wireless Access

Point

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

If any of the above items are missing, please contact your reseller.

It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for

configuring the DWL-1000AP+. The default IP address for the DWL-1000AP+ is

192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your

computer a Static IP address within the same range as the DWL-1000AP+’s IP ad-

dress for the purpose of configuring the DWL-1000AP+. See the Manual on the CD-

ROM if you need assistance in assigning a Static IP address for your network

adapter.

Using a power supply

with a different voltage

rating will damage and void

the warranty of this product.

Summary of content (9 pages)

PAGE 1
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DWL-1000AP+ D-Link AirPremierTM Wireless Access Point Before You Begin It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for configuring the DWL-1000AP+. The default IP address for the DWL-1000AP+ is 192.168.0.50 with a Subnet Mask of 255.255.255.0.
PAGE 2
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
PAGE 3
Connecting The DWL-1000AP+ Wireless Access Point To Your Network A. First, connect the power adapter to the receptor at the back panel of the DWL-1000AP+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Using a Straight-Through Ethernet cable, insert one end of the cable to the LAN ports on the back panel of the DWL-1000AP+ and the other end of the cable to a switch.
PAGE 4
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.50” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank.
PAGE 5
Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens.
PAGE 6
Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - Wireless Setup The default wireless settings are: SSID = default Channel = 6 You can change these settings to match an existing wireless network. Click Next Step 3 - Encryption The DWL-1000AP+ is capable of three levels of wireless encryption - 64-bit, 128-bit, and 256-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication.
PAGE 7
Your Setup is Complete! Click Restart Click Close 8
PAGE 8
You will be returned to the Home tab. Click to Exit For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM. Note! Refer to the Manual for information on 802.1x setup.
PAGE 9
Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone. D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week D-Link Technical Support over the Internet: http://support.dlink.