Setup guide

root-port: ether2
path-cost: 180
[admin@Wandy] interface bridge>
Bridge Port Monitoring
Command name: /interface bridge port monitor
Description
Statistics of an interface that belongs to a bridge
Property Description
status (disabled | blocking | listening | learning | forwarding) - the status of the bridge port:
• disabled - the interface is disabled. No frames are forwarded, no Bridge Protocol Data Units
(BPDUs) are heard
• blocking - the port does not forward any frames, but listens for BPDUs
• listening - the port does not forward any frames, but listens to them
• learning - the port does not forward any frames, but learns the MAC addresses
• forwarding - the port forwards frames, and learns MAC addresses
port-id (integer) - port ID, which represents from port priority and port number, and is unique
designated-root (text) - ID of bridge, which is nearest to the root-bridge
designated-port (text) - port of designated-root bridge
Example
To monitor a bridge port:
[admin@Wandy] interface bridge port> mo 0
status: forwarding
port-id: 28417
designated-root: 32768.00:02:6F:01:CE:31
designated-bridge: 32768.00:02:6F:01:CE:31
designated-port: 28417
designated-cost: 0
-- [Q quit|D dump|C-z pause]
Bridge Host Monitoring
Command name: /interface bridge host
Property Description
bridge (read-only: name) - the bridge the entry belongs to
mac-address (read-only: MAC address) - host's MAC address
on-interface (read-only: name) - which of the bridged interfaces the host is connected to
age (read-only: time) - the time since the last packet was received from the host
Example
To get the active host table: