Setup guide

actual interface will be the bridge interface to which these interfaces belong. You can check this by

typing /ip address print detail

Hosts on LAN segments #1 and #2 should use IP addresses from the same network. 192.168.0.0/24

and have the default gateway set to 192.168.0.254 (Wandy router).

Troubleshooting

Description

• After I configure the bridge, there is no ping response from hosts on bridged networks.

It may take up to 20...30s for bridge to learn addresses and start responding.

• I have added a bridge interface, but no IP traffic is passed.

You should include 'arp' in forwarded protocols list, e.g., 'forward-protocols=ip,arp,other'.

MOXA C101 Synchronous Interface

Document revision 1.1 (Fri Mar 05 08:15:42 GMT 2004)

This document applies to Wandy RouterOS V2.8

Table of Contents

General Information

Summary

Specifications