Setup guide

standard network PC interfaces to expand the router capabilities. Remote control with easy
real-time Windows application (WinBox)
• Advanced Quality of Service control with burst support
• Stateful firewall with P2P protocol filtering, tunnels and IPsec
• STP bridging with filtering capabilities
• Super high speed 802.11a/b/g wireless with WEP
• WDS and Virtual AP features
• HotSpot for Plug-and-Play access
• RIP, OSPF, BGP routing protocols
• Gigabit Ethernet ready
• V.35, X.21, T1/E1 synchronous support
• async PPP with RADUIS AAA
• IP Telephony
• remote winbox GUI admin
• telnet/ssh/serial console admin
• real-time configuration and monitoring
• and much more (please see the Specifications Sheet)
The Guide describes the basic steps of installing and configuring a dedicated PC router running
Wandy RouterOS.
Setting up Wandy RouterOS
Description
Downloading and Installing the Wandy RouterOS
The download and installation process of the Wandy RouterOS is described in the following
diagram:
1. Download the basic installation archieve file.
Depending on the desired media to be used for installing the Wandy RouterOS please
chose one of the following archive types for downloading:
• ISO image - of the installation CD, if you have a CD writer for creating CDs. The ISO image is
in the MTcdimage_v2-8-x_dd-mmm-yyyy_(build_z).zip archive file containing a bootable CD
image. The CD will be used for booting up the dedicated PC and installing the Wandy
RouterOS on its hard-drive or flash-drive.
• Netinstall - if you want to install RouterOS over a LAN with one floppy boot disk, or
alternatively using PXE or EtherBoot option supported by some network interface cards, that
allows truly networked installation. Netinstall program works on Windows 95/98/NT4/2K/XP.
• Wandy Disk Maker - if you want to create 3.5" installation floppies. The Disk Maker is a
self-extracting archive DiskMaker_v2-8-x_dd-mmm-yyyy_(build_z).exe file, which should be
run on your Windows 95/98/NT4/2K/XP workstation to create the installation floppies. The
installation floppies will be used for booting up the dedicated PC and installing the Wandy
RouterOS on its hard-drive or flash-drive.
2. Create the installation media.
Use the appropriate installation archive to create the Installation CD or floppies.